YOUR CAR / PHOTO MEASUREMENT

Mark a length.
Test a dimension.

Pick two ends of a known length, then two ends of the part you want to estimate. The worksheet keeps the four marks on an annotated image and can add the result to a project. Use a ruler beside the target, in the same plane, for the strongest estimate.

1 / Mark the first end of the known length0 of 4 points

Zoom

On a phone, zoom and scroll the image to place marks more carefully. Four taps: reference start, reference end, target start, target end.

PhotoOr use a new photo

The 110 mm starting reference is the listed width of an AJM414 replacement rocker-cover gasket. The visible cover edge and camera perspective may differ.

Known length, mm What is the known length? Part or gap to estimate

Place the four marks.

Reference endpoints come first. No result is stored until you choose a project below.

Save to project

A photo ratio is a provisional estimate, even when the arithmetic is exact. Different depths, lens distortion and a tilted reference change the scale. Do not use the result to order a tight-fitting part or machine a component; measure the car directly first.

Reference and next step

AJUSA 11007400 / AJM414 gasket listing, 360 × 110 mm ↗ is a published replacement-part size, not a measurement of your installed cover. The source guide separates factory dimensions from photo-based geometry. For a repair decision, put a ruler directly beside the fitted part and record the measurement in the planner.

Mark a length.Test a dimension.

Reference and next step

Mark a length.
Test a dimension.