{
  "source_groups": 22,
  "positive_valid_solids": 70,
  "unchanged_mesh_records": 20,
  "all_existing_joint_coil_and_seat_nodes_held": true,
  "sides": [
    {
      "side": "left",
      "old_compound_solids": 6,
      "new_connected_solids": 1,
      "retained_eye_fork_forward_wall_material": true,
      "open_fixing_bores": 4,
      "recess_web_return_and_cavity_witnesses": true,
      "seat_overlap_mm3": 0.0,
      "previous_seat_overlap_mm3": 0.0,
      "seat_distance_mm": 0.0
    },
    {
      "side": "right",
      "old_compound_solids": 6,
      "new_connected_solids": 1,
      "retained_eye_fork_forward_wall_material": true,
      "open_fixing_bores": 4,
      "recess_web_return_and_cavity_witnesses": true,
      "seat_overlap_mm3": 0.0,
      "previous_seat_overlap_mm3": 0.0,
      "seat_distance_mm": 0.0
    }
  ],
  "limits": "AHA7029 replacement photographs support the open inner recess, spring aperture, formed returns and connected arm architecture only. The 60mm aperture radius, 64-segment recess and 2.54mm projected gauge are selected estimates, not measured part dimensions. The selected recess depth keeps its downward return outside the retained 80mm seat disk in this construction frame; this is not fitted clearance. The old aperture radius80.4333mm is superseded; its 12.7mm inner land could not accommodate the photo-supported recess independently. Spring/seat, all fulcrum and anti-roll axes, eye/fork sections and neighboring assemblies remain inherited unregistered references. Mirroring is a construction assumption. No formed-sheet development, actual weld map, material strength, fatigue, loaded spring restraint, articulation or verified replacement path."
}