{
  "baseline_commit": "c586a013",
  "scope": "Static architecture and source preservation only;no measured installed clocking,gear identity,worm mesh,sweep,park,circuit or service path.",
  "native_groups": 30,
  "positive_valid_step_solids": 54,
  "retained_mesh_records_and_native_volumes": [
    "scuttle_thin_top_three_spindle_passages_and_edge_returns_reference",
    "scuttle_left_curved_A_post_corner_and_outer_return_reference",
    "scuttle_right_curved_A_post_corner_and_outer_return_reference",
    "scuttle_rear_dash_top_two_demister_slots_reference",
    "wiper_motor_can_comparison",
    "wiper_motor_strap_packing_comparison",
    "wiper_motor_unassigned_lead_boundary",
    "wiper_motor_to_first_wheelbox_casing_comparison",
    "wiper_inter_wheelbox_casings_comparison",
    "wiper_open_rack_extension_comparison",
    "wiper_right_open_wheelbox_comparison",
    "wiper_right_toothless_pinion_spindle_comparison",
    "wiper_right_bezel_seal_nut_comparison",
    "wiper_right_parked_arm_reference",
    "wiper_right_static_blade_reference",
    "wiper_center_open_wheelbox_comparison",
    "wiper_center_toothless_pinion_spindle_comparison",
    "wiper_center_bezel_seal_nut_comparison",
    "wiper_center_parked_arm_reference",
    "wiper_center_static_blade_reference",
    "wiper_left_open_wheelbox_comparison",
    "wiper_left_toothless_pinion_spindle_comparison",
    "wiper_left_bezel_seal_nut_comparison",
    "wiper_left_parked_arm_reference",
    "wiper_left_static_blade_reference"
  ],
  "existing_wheelbox_nodes_and_casing_paths_held": true,
  "motor_and_rack_axes_perpendicular_to_reference_wheel": true,
  "cover_projected_thickness_mm": 2.0,
  "open_reference_fixing_and_rack_passages": true,
  "source_neighbor_overlap_mm3": {
    "case_cover": 0.0,
    "case_wheel": 0.0,
    "case_input_stub": 0.0,
    "case_link_slider": 0.0,
    "motor_can_case": 0.0,
    "input_stub_wheel": 0.0,
    "rack_slider_feed_casing": 0.0
  },
  "link_slider_pin_internal_overlaps_mm3": [
    0.0,
    0.0,
    0.0
  ],
  "input_stub_to_wheel_source_distance_mm": 3.525422244335884,
  "source_gap_limit": "Input remains an unfinished smooth boundary,not a verified worm engagement or measured running clearance.",
  "unchanged_neighbor_native_sha256": {
    "rocker-support-reference.json": "32d6db703114ff21bf4607ecfe52382482a470d57a8735936e6f3a61be7f8a4c",
    "rocker-support-reference.step": "f16283ba19c5d4e47b8623d252ab2dffcec0beadfc50ad22d6ab4490ac5bae14",
    "front-structure-reference.json": "efa82666e085e8cf1905f60d45b0e96a3d1a4ab0577593148f77a4d0d96b79f5",
    "front-structure-reference.step": "58fdd61e0afaf11af33107b89b53f51407bca89fa7a0ef5757f280ea5b4c32cb",
    "bonnet-hinge-reference.json": "70b4d76e96e37031ca52095b7c5b98fe4cc12b0f6a15ee59877c70af53dba8f9",
    "bonnet-hinge-reference.step": "9b5a5e1f2388f68b0d79765fe2fe8271965410c8c96f8493dc9e796f8cf2fc24"
  },
  "source_mapping_complete": true,
  "limits": "No direct owner dimensions,fitted manufacturer suffix,case clocking,gear/sweep variant or nominal46-tooth replacement is selected. All case/cover/port/shaft sections,bore/fixing map,wall gauges,eccentric/phase,link/fork/pin geometry and source contacts are estimates. Existing wheel-centerY/Z,motor can/mount/lead,feed/inter-wheelbox/extension paths,spindle axes,parked arms/blades and surrounding body remain. CaseX orientation and wheel spindle direction change as reference architecture;not fitted axes or a repair template. Smooth input stub ends before the wheel;worm teeth,gear teeth/mesh,internal travel,park switch/contacts,wiring circuit,washer/circlip/bearing stack,thread/flare engagement,lubrication and loaded support are not reconstructed. No operating sweep,park setting,wiped area,clearance,torque,verified service procedure or removal path. Source gaps are construction differences,not measured vehicle clearances. Inspection separation is illustrative."
}