{
  "scope": "Local retained-pose pump-receiver comparison, not a fitted housing/pump joint.",
  "baseline_commit": "978e04c3",
  "unchanged_prior_meshes": 35,
  "new_groups": 1,
  "new_solids": 1,
  "valid_single_casting": true,
  "changed_region": "Union of old circular receiver seat and new three-ear face only; all exterior material outside that region held.",
  "three_mounting_holes_open": true,
  "front_mouth_probe_clear": true,
  "front_mouth_probe_z_mm": [
    195.2,
    195.4
  ],
  "rear_cavity_floor_and_gallery_depth_unverified": true,
  "mesh_native_relative_volume_error": 0.0010788153758019003,
  "photo_pump_nearest_source_distance_mm": 31.78049716414141,
  "photo_pump_overlap_mm3": 0.0,
  "translation_norm_mm": 90.0,
  "translation_axial_component_mm": 40.0,
  "reference": {
    "classification": "Factory/supplier architecture and gasket-photo comparison; retained unregistered source housing pose.",
    "owner_dimensions_applied": false,
    "factory_source": "https://www.spridgets.de/downloads/Parts-1977.pdf#page=64",
    "factory_roles": "144297 body;138702 body-to-cylinder-head gasket;101962 three studs;138701 pump gasket;UKC774 USA/Canada pump. Catalogue roles do not identify the actual fitted parts.",
    "comparison_source": "https://rimmerbros.com/Item--i-144297A",
    "comparison_image": "https://rimmerbros.com/ItemImages/HighRes/15430-Zoom.jpg",
    "examined": "Factory plate64 and supplier photograph visually read. Both show a three-ear pump receiver rather than a circular flange. Supplier describes an alloy replacement with two tappings; actual-car housing material and identity remain unverified.",
    "retained_native_frame": "Historical core engine mm, unchanged: +X vehicle-left,+Y up,+Z front.",
    "retained_pump_receiver_front_z_mm": 195.5,
    "retained_receiver_thickness_mm": 7.5,
    "retained_reference_axis_xy_mm": [
      0,
      30
    ],
    "geometry_basis": "Replace only the source circular seat footprint with the existing138701-style gasket-photo outer trace, central opening and three-hole map. Source thickness, axis, front plane, bore comparisons and blind stud seats remain estimates. Source casting geometry outside the local annular edit remains.",
    "photo_pump_relationship": {
      "companion_translation_mm": [
        -58,
        -56,
        40
      ],
      "translation_norm_mm": 90.0,
      "axial_component_mm": 40.0,
      "clocking_degrees": 30,
      "explanation": "90mm is the norm of the three-dimensional companion translation, not a fore/aft station gap. This receiver is not moved to the independently photo-positioned pump."
    },
    "source_sha256": {
      "midget-1500-measured-core.json": "47059768d4dc759afc01c77e127b13a13c3727913f1564fa9d12c3bdaeaf5bd9",
      "midget-1500-measured-core.step": "8d3a2eef6419982a7444e60a1f0e72e1a487938bd89c833b3daaa39d62b4a7a9"
    },
    "limits": "The gasket trace is supplier-photo scaled, not an owner measurement or a machining pattern. Fitted housing/pump/gasket identities, face shape, hole pitch, thread, depths, sealing lands and true registration remain unverified. No housing, pump, outlet, hose, engine or body is moved to close a gap or erase contact. The rest of the historical casting and its estimated/partial passages remain; no hidden coolant route is newly asserted. The upper outlet, lower hose and photo pump retain separate registration gaps. No loaded support, seal, bolt engagement, coolant behavior, tool access, safe release sequence or replacement/removal path is established. Earlier core export remains historical."
  },
  "source_sha256": {
    "intake-mounting-reference.step": "cc4000655ba8f460082abb4eb35ef75c9f6eee2d557b327b6ab6c45f760da8de",
    "intake-mounting-reference.json": "1260e3a64ca8a1f4fed37b36df1c8b61886fdf85195a3771671f2134e431f5d8",
    "water_housing_receiver_geometry.py": "7a301ad389375dc019de9be82a1907ca6182caca0b4a26e70828fdf277aa59d2"
  }
}
