{
  "schema": "starter-installed-context-audit-v1",
  "baseline_commit": "d0744dba",
  "geometry_changed": false,
  "owner_dimensions_applied": false,
  "source_count": 10,
  "role_counts": {
    "starter": 20,
    "engine": 3,
    "peripherals": 11,
    "plate": 1,
    "housing": 21,
    "gearbox": 4,
    "body": 14,
    "steering": 24,
    "exhaust": 6
  },
  "sources": [
    {
      "key": "native_engine_placement",
      "url": "/cars/1975-mg-midget/cad/midget-1500-measured-core.json?v=192",
      "translation_body_mm": [
        0.0,
        555.2,
        715.9000000000001
      ],
      "parts": [
        {
          "name": "starter_M35J_yoke_88_9mm_lucas_diameter_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_four_pole_shoes_lucas_topology_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_four_pole_shoe_screws_lucas_count_positions_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_armature_and_shaft_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_face_commutator_lucas_topology_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_insulated_brushbox_lucas_topology_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_four_wedge_brushes_lucas_count_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_drive_end_two_mount_holes_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_mounting_bolt_A_BH606071_position_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_mounting_bolt_B_BH606071_position_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_commutator_end_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_terminal_stud_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_terminal_nuts_washers_photo_lucas_topology_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_drive_shaft_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_screwed_sleeve_lucas_item17_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_thrust_collar_lucas_item18_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_main_spring_lucas_item19_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_shroud_washer_lucas_item20_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_drive_circlip_lucas_item21_provisional",
          "role": "starter"
        },
        {
          "name": "starter_M35J_nine_tooth_pinion_67H5010_provisional",
          "role": "starter"
        },
        {
          "name": "block_provisional_casting",
          "role": "engine"
        },
        {
          "name": "distributor_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_cap_five_tower_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_integral_amplifier_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_amplifier_base_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_amplifier_screws_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_vacuum_capsule_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "distributor_cap_clips_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "oil_filter_head_catalog_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "oil_filter_adapter_catalog_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "oil_filter_photo_reference_provisional",
          "role": "peripherals"
        },
        {
          "name": "oil_filter_pf53_gasket_catalog_diameters_provisional",
          "role": "peripherals"
        }
      ]
    },
    {
      "key": "native_intake_mounting_placement",
      "url": "/cars/1975-mg-midget/cad/intake-mounting-reference.json?v=9",
      "translation_body_mm": [
        0.0,
        555.2,
        715.9000000000001
      ],
      "parts": [
        {
          "name": "intake_head_with_reference_flat_manifold_land",
          "role": "engine"
        }
      ]
    },
    {
      "key": "native_sump_placement",
      "url": "/cars/1975-mg-midget/cad/sump-reference.json?v=1",
      "translation_body_mm": [
        0.0,
        555.2,
        715.9000000000001
      ],
      "parts": [
        {
          "name": "sump_stepped_front_shelf_and_deep_rear_basin_comparison",
          "role": "engine"
        }
      ]
    },
    {
      "key": "native_rear_engine_plate_placement",
      "url": "/cars/1975-mg-midget/cad/rear-engine-plate-reference.json?v=4",
      "translation_body_mm": [
        0.0,
        555.2,
        715.9000000000001
      ],
      "parts": [
        {
          "name": "rear_engine_gearbox_mounting_plate_201344_role_comparison",
          "role": "plate"
        }
      ]
    },
    {
      "key": "native_clutch_release_placement",
      "url": "/cars/1975-mg-midget/cad/clutch-release-reference.json?v=11",
      "translation_body_mm": [
        0.0,
        330.20000000000005,
        0.0
      ],
      "parts": [
        {
          "name": "clutch_hollow_housing_integral_boss_ears_and_pivot_saddles_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_split_slave_boss_flange_and_two_mount_bores_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_two_boss_to_housing_screw_envelopes",
          "role": "housing"
        },
        {
          "name": "clutch_separate_boss_pinch_bolt_and_nut_envelopes",
          "role": "housing"
        },
        {
          "name": "clutch_slave_hollow_exterior_and_closed_rear_envelope",
          "role": "housing"
        },
        {
          "name": "clutch_slave_separate_open_dust_boot_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_slave_open_inlet_and_bleed_screw_envelopes",
          "role": "housing"
        },
        {
          "name": "clutch_tilted_catalog_length_pushrod_and_bored_eye_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_slave_separate_plunger_and_estimated_rod_seat_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_slave_separate_unloaded_cup_seal_role_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_slave_separate_unloaded_return_spring_role_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_release_lever_shared_pivot_rod_and_open_carrier_saddles_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_two_housing_pivot_bush_comparisons",
          "role": "housing"
        },
        {
          "name": "clutch_pivot_pin_and_smooth_tolerance_ring_envelopes",
          "role": "housing"
        },
        {
          "name": "clutch_separate_rod_eye_joint_pin_and_retainer_envelopes",
          "role": "housing"
        },
        {
          "name": "clutch_hollow_release_carrier_reference",
          "role": "housing"
        },
        {
          "name": "clutch_separate_annular_release_bearing_envelope",
          "role": "housing"
        },
        {
          "name": "clutch_two_retained_carrier_engagement_pin_comparisons",
          "role": "housing"
        },
        {
          "name": "clutch_housing_case_uncompressed_gasket_comparison",
          "role": "housing"
        },
        {
          "name": "clutch_five_housing_to_case_screws_and_four_unloaded_washers",
          "role": "housing"
        },
        {
          "name": "clutch_bottom_housing_bolt_copper_washer_comparison",
          "role": "housing"
        }
      ]
    },
    {
      "key": "native_transmission_placement",
      "url": "/cars/1975-mg-midget/cad/transmission-reference.json?v=15",
      "translation_body_mm": [
        0.0,
        330.20000000000005,
        0.0
      ],
      "parts": [
        {
          "name": "gearbox_input_guide_reference",
          "role": "gearbox"
        },
        {
          "name": "gearbox_input_shaft_reference",
          "role": "gearbox"
        },
        {
          "name": "gearbox_extension_reference",
          "role": "gearbox"
        },
        {
          "name": "gearbox_main_case_reference",
          "role": "gearbox"
        }
      ]
    },
    {
      "key": "native_front_footwell_placement",
      "url": "/cars/1975-mg-midget/cad/front-footwell-reference.json?v=7",
      "translation_body_mm": [
        0.0,
        0.0,
        0.0
      ],
      "parts": [
        {
          "name": "front_bulkhead_with_retained_apertures_and_footwell_mouths_reference",
          "role": "body"
        },
        {
          "name": "front_left_footwell_front_and_top_comparison",
          "role": "body"
        },
        {
          "name": "front_left_footwell_outer_side_and_jamb_return_reference",
          "role": "body"
        },
        {
          "name": "front_left_inner_toeboard_and_floor_return_reference",
          "role": "body"
        },
        {
          "name": "front_left_inner_hinge_pillar_channel_and_lower_foot_reference",
          "role": "body"
        },
        {
          "name": "front_left_rear_wheelhouse_to_footwell_closing_comparison",
          "role": "body"
        },
        {
          "name": "front_right_footwell_front_and_top_comparison",
          "role": "body"
        },
        {
          "name": "front_right_footwell_outer_side_and_jamb_return_reference",
          "role": "body"
        },
        {
          "name": "front_right_inner_toeboard_and_floor_return_reference",
          "role": "body"
        },
        {
          "name": "front_right_inner_hinge_pillar_channel_and_lower_foot_reference",
          "role": "body"
        },
        {
          "name": "front_right_rear_wheelhouse_to_footwell_closing_comparison",
          "role": "body"
        }
      ]
    },
    {
      "key": "native_front_structure_placement",
      "url": "/cars/1975-mg-midget/cad/front-pickup-channel-reference.json?v=1",
      "translation_body_mm": [
        0.0,
        0.0,
        0.0
      ],
      "parts": [
        {
          "name": "front_structure_left_open_rail_reference",
          "role": "body"
        },
        {
          "name": "front_structure_right_open_rail_reference",
          "role": "body"
        },
        {
          "name": "front_structure_formed_crossmember_comparison",
          "role": "body"
        }
      ]
    },
    {
      "key": "native_steering_rack_placement",
      "url": "/cars/1975-mg-midget/cad/steering-rack-reference.json?v=8",
      "translation_body_mm": [
        0.0,
        0.0,
        0.0
      ],
      "parts": [
        {
          "name": "steering_rack_hollow_case_comparison",
          "role": "steering"
        },
        {
          "name": "steering_lhd_pinion_housing_and_input_shaft_comparison",
          "role": "steering"
        },
        {
          "name": "steering_plunger_top_cap_smooth_plug_and_hex_envelope",
          "role": "steering"
        },
        {
          "name": "steering_smooth_rack_bar_without_teeth",
          "role": "steering"
        },
        {
          "name": "steering_column_retained_axis_smooth_shaft",
          "role": "steering"
        },
        {
          "name": "steering_column_hollow_outer_sleeve_comparison",
          "role": "steering"
        },
        {
          "name": "steering_split_pinion_coupling_envelope",
          "role": "steering"
        },
        {
          "name": "steering_pinion_pinch_fixing_envelopes",
          "role": "steering"
        },
        {
          "name": "steering_left_inner_joint_cup_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_smooth_ball_and_tie_rod_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_outer_socket_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_hollow_corrugated_bellows_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_bellows_clip_envelopes",
          "role": "steering"
        },
        {
          "name": "steering_left_formed_body_bracket_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_front_clamp_cap_comparison",
          "role": "steering"
        },
        {
          "name": "steering_left_mounting_screw_washer_envelopes",
          "role": "steering"
        },
        {
          "name": "steering_right_inner_joint_cup_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_smooth_ball_and_tie_rod_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_outer_socket_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_hollow_corrugated_bellows_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_bellows_clip_envelopes",
          "role": "steering"
        },
        {
          "name": "steering_right_formed_body_bracket_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_front_clamp_cap_comparison",
          "role": "steering"
        },
        {
          "name": "steering_right_mounting_screw_washer_envelopes",
          "role": "steering"
        }
      ]
    },
    {
      "key": "native_front_exhaust_placement",
      "url": "/cars/1975-mg-midget/cad/front-exhaust-reference.json?v=2",
      "translation_body_mm": [
        0.0,
        555.2,
        715.9000000000001
      ],
      "parts": [
        {
          "name": "front_exhaust_inlet_flange_reference",
          "role": "exhaust"
        },
        {
          "name": "front_exhaust_downpipe_reference",
          "role": "exhaust"
        },
        {
          "name": "front_exhaust_manifold_fixings_reference",
          "role": "exhaust"
        },
        {
          "name": "front_exhaust_coupling_flanges_reference",
          "role": "exhaust"
        },
        {
          "name": "front_exhaust_coupling_olive_reference",
          "role": "exhaust"
        },
        {
          "name": "front_exhaust_coupling_fixings_reference",
          "role": "exhaust"
        }
      ]
    }
  ],
  "starter_part_bounds_body_mm": {
    "starter_M35J_yoke_88_9mm_lucas_diameter_provisional": {
      "x": [
        114.03488645918002,
        205.13488645918
      ],
      "y": [
        284.65000000000003,
        375.75000000000006
      ],
      "z": [
        541.4000000000001,
        691.4000000000001
      ]
    },
    "starter_M35J_four_pole_shoes_lucas_topology_provisional": {
      "x": [
        119.58488645917726,
        199.58488645918
      ],
      "y": [
        290.20000000000005,
        370.2000000000471
      ],
      "z": [
        563.4000000000001,
        663.4000000000001
      ]
    },
    "starter_M35J_four_pole_shoe_screws_lucas_count_positions_provisional": {
      "x": [
        113.73488645918,
        205.43488645918
      ],
      "y": [
        284.35,
        376.05000000000007
      ],
      "z": [
        612.9000000000001,
        619.9000000000001
      ]
    },
    "starter_M35J_armature_and_shaft_provisional": {
      "x": [
        131.08488645918,
        188.08488645918
      ],
      "y": [
        301.70000000000005,
        358.70000000000005
      ],
      "z": [
        541.4000000000001,
        691.4000000000001
      ]
    },
    "starter_M35J_face_commutator_lucas_topology_provisional": {
      "x": [
        133.58488645918,
        185.58488645918
      ],
      "y": [
        304.20000000000005,
        356.20000000000005
      ],
      "z": [
        676.4000000000001,
        681.4000000000001
      ]
    },
    "starter_M35J_insulated_brushbox_lucas_topology_provisional": {
      "x": [
        122.58488645918001,
        196.58488645918
      ],
      "y": [
        293.20000000000005,
        367.20000000000005
      ],
      "z": [
        687.4000000000001,
        691.4000000000001
      ]
    },
    "starter_M35J_four_wedge_brushes_lucas_count_provisional": {
      "x": [
        129.5848864591799,
        189.58488645918013
      ],
      "y": [
        300.19999999999993,
        360.20000000000016
      ],
      "z": [
        681.9000000000001,
        687.4000000000001
      ]
    },
    "starter_M35J_drive_end_two_mount_holes_provisional": {
      "x": [
        105.58488645918001,
        213.58488645918
      ],
      "y": [
        253.47500000000002,
        406.92500000000007
      ],
      "z": [
        533.4000000000001,
        541.4000000000001
      ]
    },
    "starter_M35J_mounting_bolt_A_BH606071_position_provisional": {
      "x": [
        152.08488645917134,
        167.08488645918
      ],
      "y": [
        260.97980947168,
        273.97019052840005
      ],
      "z": [
        525.4000000000001,
        546.4000000000001
      ]
    },
    "starter_M35J_mounting_bolt_B_BH606071_position_provisional": {
      "x": [
        152.08488645917134,
        167.08488645918
      ],
      "y": [
        386.4298094716801,
        399.42019052840004
      ],
      "z": [
        525.4000000000001,
        546.4000000000001
      ]
    },
    "starter_M35J_commutator_end_provisional": {
      "x": [
        115.13488645918001,
        204.03488645918003
      ],
      "y": [
        285.75000000000006,
        374.65000000000003
      ],
      "z": [
        691.4000000000001,
        709.4000000000001
      ]
    },
    "starter_M35J_terminal_stud_provisional": {
      "x": [
        184.08488645918,
        197.08488645918
      ],
      "y": [
        323.70000000000005,
        336.70000000000005
      ],
      "z": [
        699.4000000000001,
        717.4000000000001
      ]
    },
    "starter_M35J_terminal_nuts_washers_photo_lucas_topology_provisional": {
      "x": [
        184.58488645918,
        196.58488645918
      ],
      "y": [
        324.20000000000005,
        336.20000000000005
      ],
      "z": [
        702.4000000000001,
        714.4000000000001
      ]
    },
    "starter_M35J_drive_shaft_provisional": {
      "x": [
        154.28488645918,
        164.88488645918002
      ],
      "y": [
        324.90000000000003,
        335.50000000000006
      ],
      "z": [
        395.4000000000001,
        541.4000000000001
      ]
    },
    "starter_M35J_screwed_sleeve_lucas_item17_provisional": {
      "x": [
        152.08488645918,
        167.08488645918
      ],
      "y": [
        322.70000000000005,
        337.70000000000005
      ],
      "z": [
        440.4000000000001,
        449.4000000000001
      ]
    },
    "starter_M35J_thrust_collar_lucas_item18_provisional": {
      "x": [
        149.78488645918,
        169.38488645918002
      ],
      "y": [
        320.40000000000003,
        340.00000000000006
      ],
      "z": [
        440.4000000000001,
        444.4000000000001
      ]
    },
    "starter_M35J_main_spring_lucas_item19_provisional": {
      "x": [
        146.58531798142678,
        172.5848865591804
      ],
      "y": [
        317.20006918760964,
        343.1998459591508
      ],
      "z": [
        399.8999999000381,
        444.8781771985684
      ]
    },
    "starter_M35J_shroud_washer_lucas_item20_provisional": {
      "x": [
        145.58488645918,
        173.58488645918
      ],
      "y": [
        316.20000000000005,
        344.20000000000005
      ],
      "z": [
        397.4000000000001,
        399.4000000000001
      ]
    },
    "starter_M35J_drive_circlip_lucas_item21_provisional": {
      "x": [
        151.58488645918,
        167.54965262022
      ],
      "y": [
        322.20000000000005,
        338.20000000000005
      ],
      "z": [
        395.4000000000001,
        396.7000000000001
      ]
    },
    "starter_M35J_nine_tooth_pinion_67H5010_provisional": {
      "x": [
        143.08488645918,
        176.08488645918
      ],
      "y": [
        313.70000000000005,
        346.70000000000005
      ],
      "z": [
        449.4000000000001,
        495.4000000000001
      ]
    }
  },
  "positive_scoped_source_contacts_mm3": [
    {
      "starter": "starter_M35J_mounting_bolt_A_BH606071_position_provisional",
      "neighbor": "rear_engine_gearbox_mounting_plate_201344_role_comparison",
      "overlap_mm3": 248.282344
    },
    {
      "starter": "starter_M35J_mounting_bolt_B_BH606071_position_provisional",
      "neighbor": "rear_engine_gearbox_mounting_plate_201344_role_comparison",
      "overlap_mm3": 237.52524
    }
  ],
  "bounded_intersection_checks": 16,
  "outer_casing_to_selected_footwells": {
    "minimum_static_source_distance_mm": 245.99446634225882,
    "parts": [
      "starter_M35J_drive_end_two_mount_holes_provisional",
      "front_left_inner_toeboard_and_floor_return_reference"
    ],
    "exact_distance_checks": 3,
    "candidate_pairs": 33
  },
  "retained_source_sha256": {
    "midget-1500-measured-core.json": "47059768d4dc759afc01c77e127b13a13c3727913f1564fa9d12c3bdaeaf5bd9",
    "midget-1500-measured-core.step": "8d3a2eef6419982a7444e60a1f0e72e1a487938bd89c833b3daaa39d62b4a7a9",
    "intake-mounting-reference.json": "1260e3a64ca8a1f4fed37b36df1c8b61886fdf85195a3771671f2134e431f5d8",
    "intake-mounting-reference.step": "cc4000655ba8f460082abb4eb35ef75c9f6eee2d557b327b6ab6c45f760da8de",
    "sump-reference.json": "995508545de8916a090b1156013630e0d1bffd83e53820880f9cf550725c858d",
    "sump-reference.step": "93a3fedef4b15676c64348a8f8ad63d8b7a2fdc88b1a5d090a70a2ffc7a5bcc7",
    "rear-engine-plate-reference.json": "859f33538cf65073c8468b40fdaf16aa0c5b86bdd460c20952e11cd792125ca7",
    "rear-engine-plate-reference.step": "0a0d38dcf7b7a812b4857f60f00a9e15c144226ba7d59365a306978e774ee85e",
    "clutch-release-reference.json": "a599bfa6bbb6f583630d2e3e7e858b209120d17809874f8b8f3df1ba26acad13",
    "clutch-release-reference.step": "ed85e1ebf54c0f543f1e2beabe02867388575bfd5319601b42ba7c0b00a521c5",
    "transmission-reference.json": "352dd7363af54591f17b563acf0b39c96d31a25004c2f7b5a4cf711fa2145f72",
    "transmission-reference.step": "0f93902777648da25d369fd1425bcc501d0d170f6970d6c0f79002d3a423dfb7",
    "front-footwell-reference.json": "b7979dd3923a182e294184e60519594f1249cf0a0352a4746fccd6b6a4dc3e71",
    "front-footwell-reference.step": "8dc22ce429d94e40f16508c9f7b0f863eac45b9979294d736707b8cb0af0c943",
    "front-pickup-channel-reference.json": "69a2be63c944602f7fd6aef095d70d7ef4a48d75e11d25cfeb277b9c1a0c45ba",
    "front-pickup-channel-reference.step": "0983c9a24d1171cd80c049e1dceed001551aed91384b1f8371daa9aed1cefddc",
    "steering-rack-reference.json": "807997e9ba4fa293120f1fef45d7b5556545d0298a37148c50beae093d478d0c",
    "steering-rack-reference.step": "2a6583ecc70bd1df08ec990acec6ef18b80d777df81a5130da3b633d0aabdce6",
    "front-exhaust-reference.json": "ad8a4d819b570bf6893ded595075eff8f6fa898e24b5c8ea54e62905ed18a5e1",
    "front-exhaust-reference.step": "ccfec902371ab7f725399bf1a1546b9b472458ff205113ba3cd7da9cda80596c"
  },
  "body_register_sha256": "f9a7caa3eab941efd4014c443b7291e58d920c269cff9a1710c7e9b8797d528e",
  "evidence": {
    "owner_photos": [
      "IMG_6966",
      "IMG_6969",
      "IMG_6970"
    ],
    "scope": "Existing owner views support starter/distributor/filter context;drive-end mounting,marking,full cable route and hidden body relationships remain unmeasured.",
    "sources": [
      "https://www.spridgets.de/downloads/Parts-1977.pdf#page=185",
      "https://www.motorarkiv.dk/books/dvk007558.pdf#page=87"
    ],
    "factory_scope": "Existing documented M35J catalog/bench roles,not a fitted vehicle release sequence or dimensional body datum."
  },
  "limits": "All geometry uses the current whole-car source placements. Existing dimensions and fitted identities remain unverified where recorded. Other vehicle parts,untraced cables and tools are omitted. Visibility switches are cutaways;160mm starter offset is an artificial inspection pose,not a release order,verified withdrawal direction,collision sweep or safe support procedure. Static source distances and contacts do not establish actual-car clearance or fit. The casing distance covers only yoke,drive end,rear cap against selected footwell/bulkhead solids;it is not minimum clearance to the whole car or a swept removal path."
}