{
  "scope": "Estimated Rostyle forming and paired vents under held nominal wheel/hub geometry; no fitted wheel dimensions or operating clearance.",
  "baseline_commit": "8daf49a2",
  "native_source_groups": 8,
  "valid_positive_solids": 8,
  "held_mesh_groups": [
    "wheel_left_hollow_tyre_reference",
    "wheel_left_center_cap_reference",
    "wheel_right_hollow_tyre_reference",
    "wheel_right_center_cap_reference"
  ],
  "revised_or_added_mesh_groups": [
    "wheel_left_rim_and_pressed_center_reference",
    "wheel_left_bright_rim_trim_reference",
    "wheel_right_rim_and_pressed_center_reference",
    "wheel_right_bright_rim_trim_reference"
  ],
  "mesh_volume_error_percent": {
    "wheel_left_rim_and_pressed_center_reference": 0.04272240881670886,
    "wheel_left_hollow_tyre_reference": 0.0060996650715572365,
    "wheel_left_center_cap_reference": 0.13418003904276388,
    "wheel_left_bright_rim_trim_reference": 0.02646726740329619,
    "wheel_right_rim_and_pressed_center_reference": 0.042722408785145216,
    "wheel_right_hollow_tyre_reference": 0.00609966507202353,
    "wheel_right_center_cap_reference": 0.1341800390423975,
    "wheel_right_bright_rim_trim_reference": 0.0264672673938815
  },
  "eight_vent_witnesses_open": true,
  "adjacent_formed_spoke_and_web_material": true,
  "center_and_four_stud_bores_open": true,
  "flat_stud_land_witness_x_bounds_mm": [
    20,
    25
  ],
  "formed_face_witness_x_mm": {
    "spoke": 53.14724091247852,
    "recessed_web": 32.62743833717563
  },
  "outer_rim_above_radius150_1mm_symmetric_difference_mm3": 0.0,
  "tyre_wheel_material_overlap_mm3": 0,
  "trim_source_contacts_mm3": {
    "trim_wheel": 0.0,
    "trim_tyre": 0.0
  },
  "four_installed_wheel_datums_held": true,
  "handed_prototype_volumes_equal": true,
  "limits": "All forming/vent/trim sections remain estimates. Source bores and zero contacts do not establish fitted identities, valve/tube configuration, trim clips, loaded seating, wheel strength, steering travel, safe support or verified removal paths.",
  "sampled_hub_brake_sources": [
    "front-hub-reference",
    "front-caliper-reference",
    "rear-hub-reference",
    "rear-brake-reference"
  ],
  "selected_hub_brake_source_contacts_mm3": {
    "before": {
      "front-left-wheel__front_left_four_separate_disc_to_hub_screw_envelopes": 452.3893421169303,
      "front-right-wheel__front_right_four_separate_disc_to_hub_screw_envelopes": 452.38934211693055
    },
    "after": {
      "front-left-wheel__front_left_four_separate_disc_to_hub_screw_envelopes": 205.64717774613044,
      "front-right-wheel__front_right_four_separate_disc_to_hub_screw_envelopes": 205.64717774648332
    }
  },
  "browser_validation": {
    "nativeWheelMeshes": 16,
    "finiteVertices": 246652,
    "openVentWitnesses": 32,
    "fourAxleAndWheelPlacementsHeld": true,
    "metricPlacementAndPicking": true,
    "heldNonWheelMeshSamples": 1121,
    "productionNativeTrimSelection": true,
    "productionReloadWithoutHooks": true,
    "pageErrors": []
  },
  "forming_interpolation": "3.75-degree ruled angular sections preserve the intended field bounds and flat stud sectors; no fitted nut-seat geometry is inferred.",
  "current_source_sha256": {
    "build_wheel_profile_reference.py": "f41e3c838b804c4669730e51cefd62f9afcb1da6af7e712620369ac92fce1270",
    "wheel-profile-reference.json": "46512939f693c68c8f38c073fa2bce2367816bdf015dcbc9f7461de6085318ee",
    "wheel-profile-reference.step": "8842a7c18f0dd4cb906d050e5c660f33cb90b1f99e6dd9152e5188d57b6309c4"
  },
  "baseline_source_sha256": {
    "build_wheel_profile_reference.py": "530b62c7decd9254d000e8c3f9461fd71cae3b81a07182ccab88e62624eb1e5b",
    "wheel-profile-reference.json": "d906f1ded8dffd458a59a618670213d13b7029d778e68ddf0eb6ca08f8e75a89",
    "wheel-profile-reference.step": "18dc4073ffdf4ab367284b1905db0afdc53b75ec9af7b5c5a30126916da830e2"
  },
  "supplier_shape_image_sha256": "75950b2ef82fb982c0f18c6ba8d84de3495f9c606b744f3e3c69bb40175021ab",
  "supplier_shape_comparison": "https://www.mgocspares.co.uk/product/aha9881p/rostyle-midget-1972on-silver-painted-141",
  "meshed_inner_pressing_minimum_x_mm": 20.0,
  "trim_selected_hub_brake_contacts_mm3": {}
}