{
  "left": {
    "manufacturer_source": "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-rear-body/",
    "supplier_source": "https://www.mgocspares.co.uk/parts/mg/midget/bodywork/panels/chassis",
    "supplier_photo": "https://www.mgocspares.co.uk/ImageHandler/112377w900h900/bmh8015?Sequence=112377&Width=900&Height=900",
    "read_scope": "BMH8014/15 application and MGOC own BMH8015 photo: dished inner wall,rounded outer shoulder,broad lower scallop. No calibrated tracing or fitted identification. Raised boss/bracket in photograph not assigned or reproduced.",
    "retained_center_yz_mm": [
      330.20000000000005,
      -1016.0
    ],
    "retained_outer_radius_mm": 313.2666666666667,
    "retained_outer_x_mm": 626.5333333333334,
    "retained_inboard_web_x_mm": 397.93333333333334,
    "estimated_projected_x_wall_gauge_mm": 1.5,
    "estimated_dish_depth_mm": 18.0,
    "estimated_lower_scallop_half_span_mm": 181.69466666666668,
    "estimated_lower_scallop_rise_mm": 100.24533333333335,
    "retained_end_lower_y_mm": 296.3333333333333,
    "inherited_damper_relief": true,
    "old_small_axle_cut_superseded_by_photo_scallop": true,
    "owner_dimensions_applied": false,
    "limits": "Dish18mm,scallop proportions,projected-X gauge and shoulder section are construction estimates;not measured panel dimensions,normal steel gauge,manufacturer tooling or cutting template. Existing outer arch/roof envelope,end lower plane and external damper relief stay. Lower scallop comes from supplier topology,not an axle-clearance optimization. Old34mm round axle opening is superseded;no factory hole or loaded travel is claimed. Axle,spring,damper,reinforcement,boot floor,cabin floor,quarter and body poses stay. Left-right mirror is unverified. No fitted weld/lap,hidden boss identity,bump-stop mount,body strength,loaded wheel/axle clearance or verified repair/replacement/removal path."
  },
  "right": {
    "manufacturer_source": "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-rear-body/",
    "supplier_source": "https://www.mgocspares.co.uk/parts/mg/midget/bodywork/panels/chassis",
    "supplier_photo": "https://www.mgocspares.co.uk/ImageHandler/112377w900h900/bmh8015?Sequence=112377&Width=900&Height=900",
    "read_scope": "BMH8014/15 application and MGOC own BMH8015 photo: dished inner wall,rounded outer shoulder,broad lower scallop. No calibrated tracing or fitted identification. Raised boss/bracket in photograph not assigned or reproduced.",
    "retained_center_yz_mm": [
      330.20000000000005,
      -1016.0
    ],
    "retained_outer_radius_mm": 313.2666666666667,
    "retained_outer_x_mm": 626.5333333333334,
    "retained_inboard_web_x_mm": 397.93333333333334,
    "estimated_projected_x_wall_gauge_mm": 1.5,
    "estimated_dish_depth_mm": 18.0,
    "estimated_lower_scallop_half_span_mm": 181.69466666666668,
    "estimated_lower_scallop_rise_mm": 100.24533333333335,
    "retained_end_lower_y_mm": 296.3333333333333,
    "inherited_damper_relief": true,
    "old_small_axle_cut_superseded_by_photo_scallop": true,
    "owner_dimensions_applied": false,
    "limits": "Dish18mm,scallop proportions,projected-X gauge and shoulder section are construction estimates;not measured panel dimensions,normal steel gauge,manufacturer tooling or cutting template. Existing outer arch/roof envelope,end lower plane and external damper relief stay. Lower scallop comes from supplier topology,not an axle-clearance optimization. Old34mm round axle opening is superseded;no factory hole or loaded travel is claimed. Axle,spring,damper,reinforcement,boot floor,cabin floor,quarter and body poses stay. Left-right mirror is unverified. No fitted weld/lap,hidden boss identity,bump-stop mount,body strength,loaded wheel/axle clearance or verified repair/replacement/removal path.",
    "mirrored_from_left": true
  }
}