{
  "primary_assembly_page": "https://www.britishv8.org/Articles/BritishMotorHeritage-Midget.htm",
  "assembly_images": [
    {
      "url": "https://www.britishv8.org/Articles/Images-V15-2/MidgetBodyshell/MG-Midget-Body-BG.jpg",
      "sha256": "9f22746df76d2797f3e6c7068cb0997ae240cbc7eb389e770ad87f9b9a92c02a",
      "observation": "Low floor and tunnel meet a forward vertical heelboard below raised rear cockpit floor."
    },
    {
      "url": "https://www.britishv8.org/Articles/Images-V15-2/MidgetBodyshell/MG-Midget-Body-BK.jpg",
      "sha256": "64293f130fec9d050c985c2d9c8c94de59b306befb9aed9e025f96e4975e6b06",
      "observation": "Underbody view shows a raised rear floor and separate forward shut/heelboard region beneath the wheelhouse."
    },
    {
      "url": "https://www.britishv8.org/Articles/Images-V15-2/MidgetBodyshell/MG-Midget-Body-BH.jpg",
      "sha256": "25f7259f01a4fe5ba1e4e99c5968bd9a9e63a5c61501eabddc780b95a2a4b979",
      "observation": "Raised rear cockpit/axle floor transitions to lower luggage floor farther aft."
    }
  ],
  "manufacturer_source": "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-rear-body/",
  "manufacturer_role": "CZJ568 rubber-bumper boot-floor assembly includes rear cockpit floor; BMH8058 specifically excludes it. These roles are not fitted identities or numerical datums.",
  "owner_context": [
    "IMG_6341",
    "IMG_6329"
  ],
  "owner_scope": "Existing exterior/cabin views support seats in the doorway and wheelhouse/B-post relationships, not hidden heelboard dimensions. No owner measurements applied or recaptured.",
  "chart_search": "Bounded current search of AKM4071/76.10.01 and alternate archive/publisher sources recovered listings and earlier-model drawings, not an applicable accessible1500dimension chart. Unchanged403segments and rejected PnP correspondence probes were not retried.",
  "diagnosis": "The old main floor/tunnel ended at bodyZ=-1.20 and low heelboard at-1.16, almost at the rear axle-1.20. The recently added central sheet inherited that wrong floor level. Existing wheelhouse-front estimate is-.83; raised boot/cockpit floor front is-1.16 atY.64.",
  "supported_change": "Move the low-floor/heelboard transition to the existing wheelhouse-front estimate and add raised rear cockpit sheet joining the retained boot floor. Recut local heelboard tunnel mouth and place the crossmember under the new floor rear edge.",
  "dimension_boundary": "New stations are coordinated construction hypotheses. The exact-.83transition follows an inherited model estimate, not pixel calibration, a factory measurement, repair coordinates or actual-car survey.",
  "held": "Seat assemblies/eight floor bores, hanger pockets, wheelhouses, boot floor, engine/transmission/propshaft/axle and other mechanical frames.",
  "limits": "No fitted clearance, axle travel, spring-hanger/body registration, loaded support, strength, weld order or verified replacement path. Source conflicts are compared before/after; no mechanical source is moved to erase them."
}
