{
  "schema": "intake-photo-pose-validation-v1",
  "baseline_commit": "646131b3",
  "scope": "Yellow-face centroids approximate the visible cap top, not a measured carb axis. Projection cameras and the provisional152mm engine stud span are inherited hypotheses. The selected whole-intake translation follows that proxy while all individual component dimensions, flange clocking and local mechanism geometry remain estimates. Pixel residuals/leave-one-view-out checks share photographs and camera assumptions; they are not independent dimensional validation. The manifold neck is a connected construction between held head-side branches and the shifted carb flange, not a measured casting, circuit trace or fitted gasket map. No loaded clearance, adjustment, body/engine registration, complete remote hose/cable route or verified removal path.",
  "owner_dimensions_applied": false,
  "native_source_groups": 29,
  "valid_positive_native_solids": 79,
  "fixed_head_land_and_common_gasket_meshes_identical": true,
  "rigidly_translated_component_groups": 26,
  "translated_mesh_payloads_with_identical_topology": 19,
  "component_checks": {
    "zenith_stromberg_photo_catalog_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.5694735463533783e-13,
      "mesh_topology_retained": false
    },
    "zenith_stromberg_float_bowl_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_air_valve_catalog_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_throttle_disc_catalog_topology_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_throttle_spindle_catalog_topology_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.6905050196457754e-16,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_metering_needle_catalog_topology_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 2.348423750265726e-16,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_air_valve_spring_catalog_topology_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 3.0100633542167647e-14,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_diaphragm_catalog_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_dashpot_cover_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 3.783040911763595e-16,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_cover_screws_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 5.969901837833882e-16,
      "mesh_topology_retained": true
    },
    "carb_damper_cap_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 4.334510119522443e-15,
      "mesh_topology_retained": true
    },
    "zenith_stromberg_damper_rod_and_valve_catalog_topology_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "air_cleaner_housing_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.6639370083812463e-15,
      "mesh_topology_retained": false
    },
    "air_cleaner_lid_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 4.054013365587452e-16,
      "mesh_topology_retained": true
    },
    "air_cleaner_two_latches_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 6.798417603839494e-16,
      "mesh_topology_retained": true
    },
    "air_cleaner_filter_catalog_study_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 5.561450485731681e-16,
      "mesh_topology_retained": true
    },
    "air_cleaner_elbow_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 2.0174208630179258e-11,
      "mesh_topology_retained": true
    },
    "intake_coupling_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 3.2823260204772764e-15,
      "mesh_topology_retained": true
    },
    "air_cleaner_inlet_chamber_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": true
    },
    "intake_wire_clamp_elbow_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 4.0814773397555515e-16,
      "mesh_topology_retained": true
    },
    "intake_wire_clamp_carb_photo_reference_provisional": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 3.061108004816696e-15,
      "mesh_topology_retained": true
    },
    "intake_carb_to_manifold_gasket_role": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.9445850943256462e-16,
      "mesh_topology_retained": false
    },
    "intake_two_manifold_stud_envelopes": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.5316571740666285e-16,
      "mesh_topology_retained": false
    },
    "intake_two_manifold_nut_washer_envelopes": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 3.4352690990974075e-16,
      "mesh_topology_retained": false
    },
    "intake_cleaner_to_carb_gasket_role": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 1.9445850943256462e-16,
      "mesh_topology_retained": false
    },
    "intake_two_cleaner_screw_washer_envelopes": {
      "native_bounds_follow_translation": true,
      "native_volume_relative_difference": 0.0,
      "mesh_topology_retained": false
    }
  },
  "selected_source_contacts_mm3": {
    "manifold_carb_mm3": 0.0,
    "manifold_head_mm3": 0.0
  },
  "neck_centerline_void_witnesses": 11,
  "flange_fixing_passages_open": true,
  "manifold_connected_single_closed_solid": true,
  "new_manifold_mesh_relative_volume_error": 0.0008020240980006123,
  "head_ports_and_engine_body_pose_held": true,
  "all_seven_local_throttle_groups_follow_shared_translation": true,
  "other_native_geometry_files_held": 147,
  "conditional_selected_translation_mm": [
    -36.0,
    -5.0,
    35.0
  ],
  "photo_residuals_are_not_dimensional_accuracy": true,
  "sha256": {
    "intake-photo-pose-reference.json": "ef633b6cbb2dafff70edd23c2863c0a3d4fcb2735a7e81fe9732a62cf3c5f12e",
    "intake-mounting-reference.json": "8b37f392abfbf2bb9628f6085c8b28feab19fbb00f19201c3877ddf1fc17ad8f",
    "intake-mounting-reference.step": "e1d463a2792b4778ab0113d678a9a71294863970b494681c26aebe963a7137f8",
    "bay-cad-comparison.json": "5468e79678848d162deba341ccd9fc11afdc85f5cd7b44b171baf7e9d3624461"
  },
  "local_browser_validation": {
    "fixedSurroundingMeshSamples": 1458,
    "translatedComponentAndControlMeshSamples": 10,
    "all74SourcesReady": true,
    "normalReloadWithoutHooks": true,
    "mainInspectorStudyLink": true,
    "matchedWholeCarAndPhotoCameras": true,
    "pageErrors": []
  },
  "mobile_study_validation": {
    "comparison_images": 4,
    "horizontal_overflow": false,
    "page_errors": []
  },
  "superseded_for_current_cleaner_and_overlay_by": "cleaner-photo-envelope-validation.json",
  "historical_snapshot_scope": "Earlier intake-pose stage at baseline646131b3. Carb/head/manifold/control poses remain; subsequent cleaner shell and inlet/element stations have separate validation."
}