{
  "baseline": "f71147de",
  "source_groups": 16,
  "positive_valid_solids": 77,
  "previous_fan_solid_count": 19,
  "connected_fan_solids": 1,
  "unchanged_mesh_records_and_native_volumes": [
    "heater_case_and_necks_reference",
    "heater_rear_cover_reference",
    "heater_matrix_hollow_headers_and_flat_tube_bank_reference",
    "heater_matrix_separate_fin_pack_reference",
    "heater_matrix_two_short_unresolved_pipe_boundaries_reference",
    "heater_matrix_perimeter_seal_reference",
    "heater_blower_motor_and_plate_reference",
    "heater_visible_hose_a_reference",
    "heater_visible_hose_b_reference",
    "heater_water_control_tap_reference",
    "heater_control_elbow_reference",
    "heater_water_control_bracket_reference",
    "heater_control_remote_hose_boundary_reference",
    "heater_uncompressed_base_to_platform_seal_comparison",
    "heater_six_platform_screw_and_washer_role_comparisons"
  ],
  "fan_axis_and_bounds_held": true,
  "center_bore_open": true,
  "plate_hub_gap_closed": true,
  "vanes_reach_outer_rim": true,
  "nodes_base_depth_matrix_and_assembly_anchors_held": true,
  "static_fan_contacts_mm3": {},
  "limits": "All dimensions, vane count, straight vane sections, central bore and source orientation are construction estimates. The photograph does not establish fitted fan identity, rotation, blade curvature, motor compatibility, shaft engagement, airflow, balance, strength or operating clearance. The original motor/shaft geometry and every neighboring part stay fixed. No replacement or installation procedure is established."
}
