{
  "schema": "heater-depth-validation-v1",
  "baseline_commit": "5fbbf71e",
  "scope": "Catalog-size comparison, not a direct owner measurement, factory casing dimension or fitted scale. The MAXX-51R label is readable in owner images; its listed5.06in overall width is provisionally matched to an interpreted short outer lid edge projected onto the reconstructed label plane. Lid bevel, seam height, production variation and partial occlusion prevent treating those endpoints as measured overall-case datums. The front-panel region and three rear upper-seam features support a casing-depth comparison, not an exact outside depth or hidden cover/flange section. Rear-seam features have two views, unlike the three-view display subset. Camera calibration/crop and feature interpretation remain uncertain. Endpoint alternatives are sensitivity probes, not a statistical uncertainty bound. The selected110mm whole-car envelope is a rounded construction hypothesis. Existing casing width/height, rear datum, installed placement, engine/body and battery frames remain independent estimates. Internal matrix/fan dimensions, mount receivers, sealing, fitted clearances and replacement/removal paths are not established by this probe.",
  "source_groups": 14,
  "valid_positive_step_solids": 78,
  "changed_meshes": [
    "heater_case_and_necks_reference",
    "heater_matrix_and_pipe_envelopes_reference",
    "heater_visible_hose_a_reference",
    "heater_visible_hose_b_reference",
    "heater_uncompressed_base_to_platform_seal_comparison",
    "heater_six_platform_screw_and_washer_role_comparisons"
  ],
  "unchanged_meshes": [
    "heater_rear_cover_reference",
    "heater_matrix_perimeter_seal_reference",
    "heater_blower_motor_and_plate_reference",
    "heater_blower_fan_reference",
    "heater_water_control_tap_reference",
    "heater_control_elbow_reference",
    "heater_water_control_bracket_reference",
    "heater_control_remote_hose_boundary_reference"
  ],
  "changed_mesh_relative_volume_errors": {
    "heater_case_and_necks_reference": 0.0004104510733264063,
    "heater_matrix_and_pipe_envelopes_reference": 6.24743715393948e-06,
    "heater_visible_hose_a_reference": 0.0036176214523485103,
    "heater_visible_hose_b_reference": 0.002845626651282741,
    "heater_uncompressed_base_to_platform_seal_comparison": 3.894836583979469e-06,
    "heater_six_platform_screw_and_washer_role_comparisons": 0.0009371052207322708
  },
  "casing_width_height_rear_and_lower_datums_retained": true,
  "reference_front_and_necks_shift_mm": -38,
  "tap_and_open_hose_boundaries_retained": true,
  "selected_internal_casing_intersections_mm3": {
    "heater_matrix_and_pipe_envelopes_reference": 0.0,
    "heater_matrix_perimeter_seal_reference": 0.0,
    "heater_blower_motor_and_plate_reference": 0.0,
    "heater_blower_fan_reference": 0.0
  },
  "engine_default_heater_geometry_retained": true,
  "other_native_geometry_files_held": 150,
  "sha256": {
    "heater-assembly-reference.json": "755be5c93f84f11b8ed9de0e3a8d8dc4cf66f9c40ec58257ae4b4230b19f2839",
    "heater-assembly-reference.step": "7addcfa28c22800f68eff1b525e803731117c8b079665528376804718c6da608",
    "bay-heater-depth-reference.json": "1d42675b8b2a518f1438d117ee1dd85ac00038d4ebab2b324eb6fb629588a5c8",
    "bay-photo-reconstruction.json": "5a061a03e42dac0f4177018f65cc476c4e6fd40d6457220630323c22baa60c93"
  },
  "browser": {
    "held_surrounding_mesh_samples": 1536,
    "finite_heater_source_vertices": 47758,
    "native_heater_meshes": 14,
    "all_74_sources_ready": true,
    "metric_placement_and_picking": true,
    "normal_reload_without_hooks": true,
    "page_errors": [],
    "study_mobile": {
      "viewport": [
        390,
        844
      ],
      "all_comparison_images_loaded": true,
      "horizontal_overflow": false
    }
  }
}
