{
  "scope": "Hollow filler comparison at shared estimated tank/body datums; no fitted fluid system or removal verification.",
  "source_groups": 7,
  "valid_native_solids": 7,
  "all_parts_valid": true,
  "mesh_max_relative_volume_error_percent": 0.06439076179015624,
  "mesh_errors_percent": {
    "fuel_filler_hollow_tapered_unloaded_sleeve_reference": 0.059736561440126845,
    "fuel_filler_hollow_bent_metal_neck_reference": 0.06439076179015624,
    "fuel_filler_tank_clamp_band_and_adjuster_reference": 0.04052181920433107,
    "fuel_filler_neck_clamp_band_and_adjuster_reference": 0.038960048944725045,
    "fuel_filler_uncompressed_body_grommet_reference": 0.059671179623088655,
    "fuel_filler_uncompressed_cap_gasket_reference": 0.0597324134316457,
    "fuel_filler_closed_cap_shell_reference": 0.059623788823304213
  },
  "declared_open_axial_passages": true,
  "selected_filler_tank_contacts_mm3": {},
  "selected_internal_contacts_mm3": {},
  "selected_lid_and_rear_bumper_contacts_mm3": {},
  "unchanged_source_hashes": {
    "fuel-tank-reference.json": "529735008e47246532206e0c63859f74fae7c1a096834e39a14b6570e2db3eb3",
    "fuel-tank-reference.step": "39519bafa16ec0800f2cf9d4535b29019a09934d00baa8c2933e44594ad861ee",
    "rear-body-mount-reference.json": "edf2760a32847e7adcd14a6759a5d001f6167259abb6183f93717111ed71404e",
    "rear-body-mount-reference.step": "97e82ac65f4b2a63b2cd871e945d84122232d91761b92831710e359513eec456",
    "rear-frame-reference.json": "c2f4813d1a2f5858bb96287f36a80250ac475053f23e4fba7ef3f4ba317c8954",
    "rear-frame-reference.step": "7faac9429b261976b09612dc11f5802a8b297c4edfe6b09e5f2c6dfbcee5c980",
    "boot-lid-reference.json": "44cd3b455e4f7e330f172fc47801ce8bae994f5d04cbd67edc7b567a6be18e79",
    "boot-lid-reference.step": "15fc01b7c5e00c014a7f700f550296a4698f4b4cb208349b37a4f5e8ac7b5b72",
    "rear-bumper-reference.json": "0826b2698a0d6081065800e737a269a884586fd170ef56a55b4ac3d9c23d0762",
    "rear-bumper-reference.step": "3e891eeb5e2aaf8b54d890308e7c05a8f28c6f937e8322e561b4c14b33cc74a8"
  },
  "estimated_nodes": {
    "tank_spigot_top_body_mm": [
      152.4,
      460.08,
      -1574.8000000000002
    ],
    "sleeve_start_body_mm": [
      152.4,
      442.08,
      -1574.8000000000002
    ],
    "sleeve_end_body_mm": [
      152.4,
      538.0799999999999,
      -1584.8000000000002
    ],
    "metal_entry_body_mm": [
      152.4,
      520.0799999999999,
      -1584.8000000000002
    ],
    "metal_bend_start_body_mm": [
      152.4,
      552.6666666666666,
      -1584.8000000000002
    ],
    "metal_bend_end_body_mm": [
      152.4,
      592.6666666666666,
      -1624.8000000000002
    ],
    "metal_outlet_body_mm": [
      152.4,
      592.6666666666666,
      -1725.2666666666669
    ],
    "body_opening_center_body_mm": [
      152.4,
      592.6666666666666,
      -1710.2666666666669
    ],
    "clamp_centers_body_mm": [
      [
        152.4,
        450.08,
        -1574.8000000000002
      ],
      [
        152.4,
        530.0799999999999,
        -1584.8000000000002
      ]
    ],
    "lower_sleeve_inner_radius_mm": 36.160000000000004,
    "upper_sleeve_inner_radius_mm": 32.77333333333333,
    "sleeve_wall_mm": 4.0,
    "metal_outer_inner_radii_mm": [
      32.17333333333333,
      30.173333333333332
    ],
    "metal_bend_radius_mm": 40.0,
    "unloaded_radial_allowance_mm": 0.6,
    "sleeve_overlap_mm": 18
  },
  "owner_dimensions_applied": false,
  "body_receivers_created": false,
  "limits": "No direct owner dimensions or fitted filler/neck/cap/hose/clip/seal identities are established. Factory PDF90 separates filler/neck/cap branches, including California/unleaded changes; MGOC CHA452 connector and two-clip catalog architecture are comparisons, not fitted parts selection. Catalog GHC1622 clip range and other supplier alternatives do not size these estimated bands. Tank spigot and rear-body opening X/Z/Y datums are retained construction poses; intermediate neck/hose stations,40mm metal bend, all diameters/walls/sections, clamp map,15mm external outlet extension and cap/grommet shape are estimates. The0.6mm radial allowance,18mm sleeve/neck overlap and0.5mm clamp allowance are display choices, not fitted clearance, insertion, compression or sealing. Tank and metal outlets are hollow but no verified fluid/fuel compatibility, loaded support, leak-tight joint, bayonet/thread/lock, vented-cap function or actual clamp release is simulated. Factory port variants and manufacturer RO9F comparison do not identify this installation. The independent tank-vapor neck/ELC route and floor hole remain unregistered; no vapor relocation or new body holes are fabricated. No safe drain/disconnect/support sequence, torque, tool access or verified replacement/removal path. Separation is illustrative.",
  "browser_validation": {
    "nativeMeshes": 7,
    "finiteVertices": 21164,
    "allAssembliesReady": 69,
    "metricPlacementAndPicking": true,
    "missingSourceLeavesOthersUsable": true,
    "isolation": true,
    "productionReloadWithoutHooks": true,
    "pageErrors": []
  }
}