{ "scope": "Estimated longitudinal front-upper contour correction; no calibrated fitted body or operating clearance. Pump ledge and untraced local curve construction follow the revised surroundings; dimensions, fixed endpoints and held mechanical frames are checked.", "profile": { "start_source_z_units": 0.13, "end_source_z_units": 1.99, "maximum_drop_units": 0.1, "maximum_drop_mm": 84.66666666666669, "shape": "maximum_drop*sin(pi*(source_z-start)/(end-start)); zero outside the interval", "wheelhouse_blend_lower_y_units": 0.77, "wheelhouse_blend_rule": "Interpolate upper-panel height correction from zero at existing wheelhouse-opening roofY=.77 to the full correction at the old upper-wing inner edge. Rigid equipment follows its mount axis; dimensions are retained.", "evidence": "/cars/1975-mg-midget/cad/owner-photo-registration-audit.json", "owner_photos": [ "IMG_6329", "IMG_6855", "IMG_6856" ], "owner_dimensions_applied": false, "basis": "Both retained wheel-camera and EXIF-focal sensitivity branches place the former far upper-front contour above the owner outline. The selected0.10-unit peak is a conservative contour construction; it is not a fitted height or the optimum of one photograph. Rear/nose stations, nominal axles, marker and engine/body pose stay.", "limits": "Camera calibration, crop/distortion, contour correspondence, fitted sections and common mounting remain uncertain. The sinusoidal correction is an estimated longitudinal profile, not a uniform body/engine move, material/tooling specification, measured seam, loaded clearance or verified removal path. Rear/nose zero values preserve current drawing interfaces; they do not certify those interfaces on the actual car." }, "pump_mount_and_roof_comparison": { "rigid_translation_mm": [ 0.0, -30.787557015551442, 0.0 ], "unchanged_dimension_groups": [ "observed_electric_pump_retained_barrel_reference", "observed_electric_pump_retained_label_reference", "observed_electric_pump_retained_red_bands_reference", "observed_electric_pump_strap_and_bored_mount_foot_reference", "observed_electric_pump_mount_fixing_and_ring_lug_envelopes", "observed_electric_pump_bored_right_angle_fitting_a_reference", "observed_flow_marked_device_retained_body_with_declared_axis_alignment", "observed_pump_to_flow_device_open_metal_union_reference", "observed_flow_device_bored_outer_fitting_b_reference", "observed_pump_and_flow_device_two_local_clamp_envelopes", "observed_electric_pump_two_terminal_and_grommet_references", "observed_electric_pump_two_local_lead_envelopes_unassigned_circuit" ], "remote_hose_endpoints_held": true, "shared_receiver_axis_open": true, "reference_axis_to_ledge_height_difference_mm": 0.0, "closed_bonnet_skin_contacts_mm3": {}, "limits": "Axis coincidence is a reference relationship. The newly curved ledge does not establish full foot seating, fitted drilling, loaded support or a verified removal path. Local hose routes are estimates; absence of these source intersections is not whole-car clearance.", "revised_untraced_hose_a_skin_contact_mm3": 0.0, "hose_a_control_rises_mm": [ 60, 240 ] }, "source_groups": 98, "valid_positive_step_solids": 290, "assemblies": { "bonnet-structure-reference": { "source_groups": 8, "valid_positive_solids": 15, "identical_mesh_groups": [], "revised_mesh_groups": [ "bonnet_thin_curved_skin_revised_transverse_crown_reference", "bonnet_left_formed_side_edge_channel", "bonnet_right_formed_side_edge_channel", "bonnet_rear_slotted_formed_rail_and_hollow_hinge_lands", "bonnet_front_formed_closure_rail_reference", "bonnet_four_unthreaded_hinge_screw_and_washer_sets", "bonnet_carried_stay_attachment_with_open_pin_eye", "bonnet_carried_stay_pin_envelope" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "bonnet_thin_curved_skin_revised_transverse_crown_reference": 0.0013915827582255957, "bonnet_left_formed_side_edge_channel": 0.01824601699533801, "bonnet_right_formed_side_edge_channel": 0.0359988893131602, "bonnet_rear_slotted_formed_rail_and_hollow_hinge_lands": 0.006882163597143887, "bonnet_front_formed_closure_rail_reference": 0.004716030873508359, "bonnet_four_unthreaded_hinge_screw_and_washer_sets": 0.03503006273516407, "bonnet_carried_stay_attachment_with_open_pin_eye": 0.018962191684024354, "bonnet_carried_stay_pin_envelope": 0.05976665873744791 } }, "bonnet-hinge-reference": { "source_groups": 8, "valid_positive_solids": 22, "identical_mesh_groups": [ "bonnet_left_body_bracket_two_pivots_and_smooth_pins", "bonnet_left_long_link_open_eye_comparison", "bonnet_left_short_link_open_eye_comparison", "bonnet_right_body_bracket_two_pivots_and_smooth_pins", "bonnet_right_long_link_open_eye_comparison", "bonnet_right_short_link_open_eye_comparison" ], "revised_mesh_groups": [ "bonnet_left_carried_two_pivot_bracket_and_retained_fixing_leaf", "bonnet_right_carried_two_pivot_bracket_and_retained_fixing_leaf" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "bonnet_left_body_bracket_two_pivots_and_smooth_pins": 0.0158670927549176, "bonnet_left_carried_two_pivot_bracket_and_retained_fixing_leaf": 0.014124720378494438, "bonnet_left_long_link_open_eye_comparison": 0.005012465030251878, "bonnet_left_short_link_open_eye_comparison": 0.010733493854753196, "bonnet_right_body_bracket_two_pivots_and_smooth_pins": 0.015867092754939804, "bonnet_right_carried_two_pivot_bracket_and_retained_fixing_leaf": 0.014124720378438926, "bonnet_right_long_link_open_eye_comparison": 0.005012465030251878, "bonnet_right_short_link_open_eye_comparison": 0.0107334938547754 } }, "headlamp-reference": { "source_groups": 30, "valid_positive_solids": 73, "identical_mesh_groups": [ "headlamp_left_wing_nacelle_open_shell_and_bored_mount_lip", "headlamp_left_uncompressed_bowl_to_body_gasket", "headlamp_left_rear_ported_outer_bowl_and_bored_mount_flange", "headlamp_left_inner_seating_ring_and_bored_adjuster_ears", "headlamp_left_opaque_complete_seven_inch_light_unit_envelope", "headlamp_left_three_hole_light_unit_retaining_ring", "headlamp_left_three_light_unit_retaining_screw_comparisons", "headlamp_left_two_trimmer_screws_retainers_and_unloaded_spring_boundary", "headlamp_left_outer_rim_bottom_clip_and_screw_boundary", "headlamp_left_rear_grommet_connector_and_three_unassigned_local_tails", "headlamp_left_four_bowl_to_body_fixing_comparisons", "headlamp_right_wing_nacelle_open_shell_and_bored_mount_lip", "headlamp_right_uncompressed_bowl_to_body_gasket", "headlamp_right_rear_ported_outer_bowl_and_bored_mount_flange", "headlamp_right_inner_seating_ring_and_bored_adjuster_ears", "headlamp_right_opaque_complete_seven_inch_light_unit_envelope", "headlamp_right_three_hole_light_unit_retaining_ring", "headlamp_right_three_light_unit_retaining_screw_comparisons", "headlamp_right_two_trimmer_screws_retainers_and_unloaded_spring_boundary", "headlamp_right_outer_rim_bottom_clip_and_screw_boundary", "headlamp_right_rear_grommet_connector_and_three_unassigned_local_tails", "headlamp_right_four_bowl_to_body_fixing_comparisons", "front_landing_panel_with_estimated_rear_tongue", "front_left_wing_inward_wheel_opening_return_reference", "front_left_wing_retained_side_marker_envelope", "front_right_wing_inward_wheel_opening_return_reference", "front_right_wing_retained_side_marker_envelope" ], "revised_mesh_groups": [ "front_nose_panel_and_upper_return_with_headlamp_notches", "front_left_wing_rolled_shoulder_and_side_skin_reference", "front_right_wing_rolled_shoulder_and_side_skin_reference" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "front_nose_panel_and_upper_return_with_headlamp_notches": 0.005146474651329669, "headlamp_left_wing_nacelle_open_shell_and_bored_mount_lip": 0.0014126167833472536, "headlamp_left_uncompressed_bowl_to_body_gasket": 0.024791607692820072, "headlamp_left_rear_ported_outer_bowl_and_bored_mount_flange": 0.06494892210855419, "headlamp_left_inner_seating_ring_and_bored_adjuster_ears": 0.02129524843289543, "headlamp_left_opaque_complete_seven_inch_light_unit_envelope": 0.5411092352608726, "headlamp_left_three_hole_light_unit_retaining_ring": 0.028146949382035213, "headlamp_left_three_light_unit_retaining_screw_comparisons": 0.09309663044273497, "headlamp_left_two_trimmer_screws_retainers_and_unloaded_spring_boundary": 0.06894347800203704, "headlamp_left_outer_rim_bottom_clip_and_screw_boundary": 0.020038334421657034, "headlamp_left_rear_grommet_connector_and_three_unassigned_local_tails": 0.02565250950263831, "headlamp_left_four_bowl_to_body_fixing_comparisons": 0.09290835138926479, "headlamp_right_wing_nacelle_open_shell_and_bored_mount_lip": 0.001977480723969194, "headlamp_right_uncompressed_bowl_to_body_gasket": 0.024767758328325673, "headlamp_right_rear_ported_outer_bowl_and_bored_mount_flange": 0.08292248913728262, "headlamp_right_inner_seating_ring_and_bored_adjuster_ears": 0.02128746956415739, "headlamp_right_opaque_complete_seven_inch_light_unit_envelope": 0.5408661837250528, "headlamp_right_three_hole_light_unit_retaining_ring": 0.028146949382135134, "headlamp_right_three_light_unit_retaining_screw_comparisons": 0.09309663044539951, "headlamp_right_two_trimmer_screws_retainers_and_unloaded_spring_boundary": 0.06893116580855008, "headlamp_right_outer_rim_bottom_clip_and_screw_boundary": 0.02006473466392711, "headlamp_right_rear_grommet_connector_and_three_unassigned_local_tails": 0.02565250950239406, "headlamp_right_four_bowl_to_body_fixing_comparisons": 0.09290835138897613, "front_landing_panel_with_estimated_rear_tongue": 0.0005510904035110897, "front_left_wing_rolled_shoulder_and_side_skin_reference": 0.07399712109404932, "front_left_wing_inward_wheel_opening_return_reference": 0.004249578810622268, "front_left_wing_retained_side_marker_envelope": 0.000338119211329424, "front_right_wing_rolled_shoulder_and_side_skin_reference": 0.07399712088770327, "front_right_wing_inward_wheel_opening_return_reference": 0.004249578795534337, "front_right_wing_retained_side_marker_envelope": 0.00033811935313821095 } }, "front-wheelhouse-reference": { "source_groups": 10, "valid_positive_solids": 98, "identical_mesh_groups": [], "revised_mesh_groups": [ "front_left_inner_valance_and_lower_access_reference", "front_left_folded_top_and_sloping_end_panel_reference", "front_left_outer_wheelarch_closure_reference", "front_left_outer_wing_attachment_return_reference", "front_left_rail_to_inner_valance_support_web_reference", "front_right_inner_valance_and_lower_access_reference", "front_right_folded_top_and_sloping_end_panel_reference", "front_right_outer_wheelarch_closure_reference", "front_right_outer_wing_attachment_return_reference", "front_right_rail_to_inner_valance_support_web_reference" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "front_left_inner_valance_and_lower_access_reference": 2.7314968553682206e-05, "front_left_folded_top_and_sloping_end_panel_reference": 4.804339259756318e-07, "front_left_outer_wheelarch_closure_reference": 1.385011663135316e-05, "front_left_outer_wing_attachment_return_reference": 0.10765441157025712, "front_left_rail_to_inner_valance_support_web_reference": 5.470662300943729e-06, "front_right_inner_valance_and_lower_access_reference": 2.7314968553682206e-05, "front_right_folded_top_and_sloping_end_panel_reference": 1.0964324215212429e-05, "front_right_outer_wheelarch_closure_reference": 1.385011665355762e-05, "front_right_outer_wing_attachment_return_reference": 0.1076544115686584, "front_right_rail_to_inner_valance_support_web_reference": 5.470662300943729e-06 } }, "wiper-drive-reference": { "source_groups": 28, "valid_positive_solids": 54, "identical_mesh_groups": [ "scuttle_thin_top_three_spindle_passages_and_edge_returns_reference", "scuttle_rear_dash_top_two_demister_slots_reference", "wiper_motor_can_comparison", "wiper_motor_gear_housing_comparison", "wiper_motor_gear_cover_comparison", "wiper_static_drive_disc_link_comparison", "wiper_motor_strap_packing_comparison", "wiper_motor_unassigned_lead_boundary", "wiper_motor_to_first_wheelbox_casing_comparison", "wiper_inter_wheelbox_casings_comparison", "wiper_open_rack_extension_comparison", "wiper_right_open_wheelbox_comparison", "wiper_right_toothless_pinion_spindle_comparison", "wiper_right_bezel_seal_nut_comparison", "wiper_right_parked_arm_reference", "wiper_right_static_blade_reference", "wiper_center_open_wheelbox_comparison", "wiper_center_toothless_pinion_spindle_comparison", "wiper_center_bezel_seal_nut_comparison", "wiper_center_parked_arm_reference", "wiper_center_static_blade_reference", "wiper_left_open_wheelbox_comparison", "wiper_left_toothless_pinion_spindle_comparison", "wiper_left_bezel_seal_nut_comparison", "wiper_left_parked_arm_reference", "wiper_left_static_blade_reference" ], "revised_mesh_groups": [ "scuttle_left_curved_A_post_corner_and_outer_return_reference", "scuttle_right_curved_A_post_corner_and_outer_return_reference" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "scuttle_thin_top_three_spindle_passages_and_edge_returns_reference": 0.0001885795622991182, "scuttle_left_curved_A_post_corner_and_outer_return_reference": 0.014780318527862768, "scuttle_right_curved_A_post_corner_and_outer_return_reference": 0.014780312099649251, "scuttle_rear_dash_top_two_demister_slots_reference": 0.0022050879452395478, "wiper_motor_can_comparison": 0.09298266075384864, "wiper_motor_gear_housing_comparison": 0.0009470124048505113, "wiper_motor_gear_cover_comparison": 0.0019693314349034097, "wiper_static_drive_disc_link_comparison": 0.0850291040710549, "wiper_motor_strap_packing_comparison": 0.014092387605324497, "wiper_motor_unassigned_lead_boundary": 0.09343454464907364, "wiper_motor_to_first_wheelbox_casing_comparison": 0.10525636151093032, "wiper_inter_wheelbox_casings_comparison": 0.0930099918261984, "wiper_open_rack_extension_comparison": 0.09300999183182723, "wiper_right_open_wheelbox_comparison": 0.004639963098340694, "wiper_right_toothless_pinion_spindle_comparison": 0.09340927634957641, "wiper_right_bezel_seal_nut_comparison": 0.09298261628317706, "wiper_right_parked_arm_reference": 0.09313725720865307, "wiper_right_static_blade_reference": 0.000342474878300969, "wiper_center_open_wheelbox_comparison": 0.003546779704466374, "wiper_center_toothless_pinion_spindle_comparison": 0.09337660664540115, "wiper_center_bezel_seal_nut_comparison": 0.09305455443386901, "wiper_center_parked_arm_reference": 0.09307568914558306, "wiper_center_static_blade_reference": 0.0003590331566272198, "wiper_left_open_wheelbox_comparison": 0.004639963426433802, "wiper_left_toothless_pinion_spindle_comparison": 0.09340927745374872, "wiper_left_bezel_seal_nut_comparison": 0.09298261456874846, "wiper_left_parked_arm_reference": 0.09317879214016944, "wiper_left_static_blade_reference": 0.00034247487332716986 } }, "observed-fuel-pump-reference": { "source_groups": 14, "valid_positive_solids": 28, "identical_mesh_groups": [], "revised_mesh_groups": [ "observed_electric_pump_retained_barrel_reference", "observed_electric_pump_retained_label_reference", "observed_electric_pump_retained_red_bands_reference", "observed_electric_pump_strap_and_bored_mount_foot_reference", "observed_electric_pump_mount_fixing_and_ring_lug_envelopes", "observed_electric_pump_bored_right_angle_fitting_a_reference", "observed_flow_marked_device_retained_body_with_declared_axis_alignment", "observed_pump_to_flow_device_open_metal_union_reference", "observed_flow_device_bored_outer_fitting_b_reference", "observed_pump_local_hollow_hose_a_untraced_boundary", "observed_flow_device_local_hollow_hose_b_untraced_boundary", "observed_pump_and_flow_device_two_local_clamp_envelopes", "observed_electric_pump_two_terminal_and_grommet_references", "observed_electric_pump_two_local_lead_envelopes_unassigned_circuit" ], "geometry_held_despite_remesh": [], "mesh_volume_error_percent": { "observed_electric_pump_retained_barrel_reference": 0.09325881383354107, "observed_electric_pump_retained_label_reference": 0.0921140623558192, "observed_electric_pump_retained_red_bands_reference": 0.09157633678619215, "observed_electric_pump_strap_and_bored_mount_foot_reference": 0.06483172366308354, "observed_electric_pump_mount_fixing_and_ring_lug_envelopes": 0.09317408090632195, "observed_electric_pump_bored_right_angle_fitting_a_reference": 0.01740600916151358, "observed_flow_marked_device_retained_body_with_declared_axis_alignment": 0.09318421770649898, "observed_pump_to_flow_device_open_metal_union_reference": 0.09331164819627036, "observed_flow_device_bored_outer_fitting_b_reference": 0.09290054844920403, "observed_pump_local_hollow_hose_a_untraced_boundary": 0.742886107170182, "observed_flow_device_local_hollow_hose_b_untraced_boundary": 0.1651473800605041, "observed_pump_and_flow_device_two_local_clamp_envelopes": 0.04887604042924654, "observed_electric_pump_two_terminal_and_grommet_references": 0.0935569157993088, "observed_electric_pump_two_local_lead_envelopes_unassigned_circuit": 0.6347313157620271 } } }, "maximum_revised_mesh_volume_error_percent": 0.742886107170182, "nominal_and_native_placement_transforms_held": true, "rear_and_nose_profile_interfaces_held": true, "transverse_crown_held": true, "hinge_pivots_and_link_lengths_held": true, "upper_wheelhouse_faces_follow_wing": true, "current_wing_closing_face_source_contacts_mm3": { "left_wing_upper_closing_face": 0.0, "right_wing_upper_closing_face": 1919.0056527925155 }, "photo_comparison": { "retained_wheel_camera": { "before": { "vertical_rms_pixels": 45.966236679096816, "vertical_residuals_pixels": [ -27.20401661704534, -34.22103737624167, -40.23563963664111, -47.25797121823223, -53.534781526804466, -57.557643571049255, -53.869537197465036, -45.37638869750151 ] }, "after": { "vertical_rms_pixels": 24.41465097241119, "vertical_residuals_pixels": [ -21.497547731203838, -16.80759006085532, -13.765776810369857, -15.593956973781872, -21.027313109381566, -29.3233099861273, -33.838963310227996, -33.82623044889283 ] } }, "exif_focal_sensitivity": { "before": { "vertical_rms_pixels": 30.09260046127504, "vertical_residuals_pixels": [ -15.229270957287497, -22.05892891511826, -27.886283430992023, -34.73511467238819, -39.31968766209735, -40.927552100873925, -32.61256995102383, -16.03542044600283 ] }, "after": { "vertical_rms_pixels": 10.057780328207128, "vertical_residuals_pixels": [ -7.737977082767372, -3.154929629827791, -0.6161736264539286, -3.268491724552746, -8.24723731597578, -15.732424504706273, -17.278027137556137, -10.692177362040184 ] } } }, "unchanged_source_sha256": { "midget-1500-measured-core.json": "3e2577e1688663a6ea3a985091fc8a35bea6d5054514cafac4562973c741cc9e", "midget-1500-measured-core.step": "05849788af49defc430885ffedac66589fea076e2c7581197aff29780fed0a39", "front-power-support-reference.json": "3a02e9b18909d54d9536e916c3e1ea66574aabdfcaa56700e5f5faf2279177fa", "front-power-support-reference.step": "f63349dca9d264f709c761ff2beeaa181ad931301110dcc4b39cb4936138da27", "steering-rack-reference.json": "8422f6fad064fabc2d1fedf9887135b1e5e2632e76087cb00efdff119194ab3b", "steering-rack-reference.step": "6d2f3eb033a4fa695ae1ab21da44cf30c4dcc895d160106198a06de654b61e73", "column-assembly-reference.json": "9623ce3ae6acf20615282804cd955f1153d33a80a30a29415403a4a7fc14bf28", "column-assembly-reference.step": "7dd4b5d829af4de5c95abc65c1bac46a707c9b690ccbfd8afa276bc2c1bc6c24", "windscreen-reference.json": "8726dcd72d6383d4d04b6d1d193818c2441b9e547e2257e6512463e1e1798fed", "windscreen-reference.step": "c5135ac5f5889664ef5579bdfd3d95927a240ac8c0a683b48880f0bf715445d9", "rear-quarter-reference.json": "b333b14fa9cdbfad82e1b4f7e16edf76d7b901d606f50afa0946645057f03e51", "rear-quarter-reference.step": "41cd87f4893fd8bfc92e6e13a23d9d0f406aefcc6d8bf75ac4ae4cb2c0e259a5", "boot-body-reference.json": "2e0a0167c06368d529a79dde542e94cea64f7edb3fb8840e08d6dfcd1f0347f1", "boot-body-reference.step": "32a12a94dcb0e19f8269897966d0001d33fc644802107c573351c3e1483039cf", "boot-floor-reference.json": "b9bdd93c5a3cb53bfad74ee26ed1697be95abce1b04c15bcc57c5bafcf2b58c8", "boot-floor-reference.step": "88dcf8a78ca2103f4ac43e1887a1a5e9215e2b1c24842f5203525bcbebc33b7e" }, "limited_bonnet_roof_contacts": {}, "limited_bonnet_roof_scope": [ "rocker_cover_photo_scaled", "carb_damper_cap_photo_reference_provisional", "air_cleaner_housing_photo_reference_provisional", "air_cleaner_inlet_chamber_photo_reference_provisional", "heater_case_and_necks_reference", "heater_blower_motor_and_plate_reference" ], "limits": "The source profile is a conservative construction choice anchored to current rear/nose interfaces. Better agreement with both conditional cameras does not establish surveyed panel dimensions, fitted seams or full-car collision/removal clearance. Sampled source contacts and absence of six roof contacts do not certify safe bonnet operation or support.", "current_native_source_sha256": { "bonnet-structure-reference.json": "81586d56b27c0e3ce34d771db8429ea4a86cd2862284e3ee87c69cf47a8aa5fb", "bonnet-structure-reference.step": "69e4663ba2b41c1821c97c7a3a772cb413f0801fd3c91b255059906d6e59f233", "bonnet-hinge-reference.json": "01a905a782d2b3624aa2f90811c5d5894edd4e93c58a54145a2909379b16c4f3", "bonnet-hinge-reference.step": "ad711c1db15c699cc80f06c4cfa1c144b09dde402ba4d932d9c3d35883547b54", "headlamp-reference.json": "930cfdc05bd639293fe7a4f83f5407c7d4102219a560c171a86929830aa5f2d5", "headlamp-reference.step": "12d3cddf31b9ff6a6ec01dae78ad2538594baf559763035fee413befec14be39", "front-wheelhouse-reference.json": "4349ceaaea65bed49be123e680bbfacbff8627302a0303cedd483fd8095cecb2", "front-wheelhouse-reference.step": "aec714cb069d6368e9e70ba574dc79af9076794261f3e3223ef3fb5817d337f2", "wiper-drive-reference.json": "98f67ade8760c69a5e9045ed839ecb4aa0b0cbc163ab9a28196694c0571bf6b0", "wiper-drive-reference.step": "a63b306d72c65f10dffc7962fe6093ff1404d22337c0ff66a71e29c384c64c2f", "observed-fuel-pump-reference.json": "83d8d8523edf6496c8e1f34d55ff99a31266ffbd0a1c9abae335bfbb048eaaf9", "observed-fuel-pump-reference.step": "ba6aa99d02c1039562c350d90ad77c93b929f636ed85aab29bebb238b5523268" }, "browser_validation": { "nativeMeshes": 98, "finiteVertices": 448614, "metricPlacementAndPicking": true, "actualNativeCenterBonnetReductionMm": 84.60904038135516, "heldNeighborBounds": [ "body-shell", "windscreen", "steering-column", "steering-rack", "front-left-wheel", "front-right-wheel", "rear-left-wheel", "rear-right-wheel", "front-landing-panel" ], "retainedEngineWorldSamples": 1559, "allAssembliesReady": 74, "ownerCameraProjectionChecked": true, "bonnetOpenCloseReset": true, "movingLinksVisible": true, "productionReloadWithoutHooks": true, "pageErrors": [] }, "reference_bonnet_motion_validation": { "samples": 2002, "max_pivot_and_rigid_link_error_mm": 1.6077746776921858e-13, "native_and_viewer_nodes_agree": true, "actual_car_travel_verified": false, "collision_clearance_verified": false }, "evidence_baseline_commit": "37355574", "construction_source_sha256": { "front_upper_profile.py": "ae84b6d120839948c689d09da10cdfecc51abb5b6e3ee9ec96e96b339c8023b9", "bonnet_surface.py": "872d184ecf1d323baac344bf04d445757843e208053f42c654b50ac4d0e1b381", "front_wing_geometry.py": "8b678e284c0720fe8884c9759690323491aaa033f28dcd91947833bbd6a4776c", "scuttle_geometry.py": "21cb420850f4c4c46792eec39dadbe8eca15849fc70bb2710fbbfdc0034cedb1", "observed_pump_mount_layout.py": "6974c55bcbad03560a7cf2e156a9f08107637158e10e251cbf5320034cc6497f", "build_front_wheelhouse_reference.py": "ca00a00f4f355a602c2653197fc0126dfe99c62d388218ae7b1b13c6383071c4", "build_observed_fuel_pump_reference.py": "08ad88f98f50680bba37431c04363872aba719d6076f3dd7f04341b639a0503e" } }