{
  "baseline_commit": "c76d6556",
  "scope": "Static estimated connection construction only; no fitted identity, spring contact, preload, torque, strength or verified replacement path.",
  "native_groups": 20,
  "valid_positive_step_solids": 78,
  "byte_identical_retained_meshes": [
    "front_left_four_tapered_inner_bush_comparisons",
    "front_left_two_stepped_inner_pin_comparisons",
    "front_left_inner_special_washer_nut_comparisons",
    "front_left_kingpin_and_bored_lower_foot_reference",
    "front_left_stepped_outer_fulcrum_pin_reference",
    "front_left_lower_cotter_washer_nut_reference",
    "front_left_outer_end_plugs_grease_nipple_and_ring_references",
    "front_right_four_tapered_inner_bush_comparisons",
    "front_right_two_stepped_inner_pin_comparisons",
    "front_right_inner_special_washer_nut_comparisons",
    "front_right_kingpin_and_bored_lower_foot_reference",
    "front_right_stepped_outer_fulcrum_pin_reference",
    "front_right_lower_cotter_washer_nut_reference",
    "front_right_outer_end_plugs_grease_nipple_and_ring_references"
  ],
  "existing_nodes_unchanged": true,
  "side_checks": {
    "left": {
      "four_shared_open_mount_bores": true,
      "adjacent_pan_and_seat_material": true,
      "pan_seat_faces_meet_without_positive_overlap": true,
      "twelve_fixing_solids": true,
      "fixings_clear_pan_and_seat": true,
      "pan_changes_remove_material_only": true,
      "removed_pan_volume_mm3": 590.1745693674893,
      "unresolved_reference_coil_gap_mm": 7.61999999999996
    },
    "right": {
      "four_shared_open_mount_bores": true,
      "adjacent_pan_and_seat_material": true,
      "pan_seat_faces_meet_without_positive_overlap": true,
      "twelve_fixing_solids": true,
      "fixings_clear_pan_and_seat": true,
      "pan_changes_remove_material_only": true,
      "removed_pan_volume_mm3": 590.1745693646371,
      "unresolved_reference_coil_gap_mm": 7.61999999999996
    }
  },
  "retained_neighbor_files": [
    "front-kingpin-reference.json",
    "front-kingpin-reference.step",
    "front-structure-reference.json",
    "front-structure-reference.step",
    "front-hub-reference.json",
    "front-hub-reference.step",
    "front-caliper-reference.json",
    "front-caliper-reference.step",
    "steering-arm-reference.json",
    "steering-arm-reference.step",
    "antiroll-reference.json",
    "antiroll-reference.step"
  ],
  "source_mapping_complete": true
}