{
  "baseline_commit": "7d67863b",
  "scope": "Factory/supplier comparison geometry and source preservation only; conditional OD interpretation/end construction, no fitted spring or working suspension.",
  "native_groups": 22,
  "valid_positive_step_solids": 80,
  "byte_identical_retained_meshes": [
    "front_left_formed_lower_spring_seat_comparison",
    "front_left_four_spring_seat_fixing_sets_comparison",
    "front_left_pressed_wishbone_and_eye_reference",
    "front_left_four_tapered_inner_bush_comparisons",
    "front_left_two_stepped_inner_pin_comparisons",
    "front_left_inner_special_washer_nut_comparisons",
    "front_left_kingpin_and_bored_lower_foot_reference",
    "front_left_stepped_outer_fulcrum_pin_reference",
    "front_left_lower_cotter_washer_nut_reference",
    "front_left_outer_end_plugs_grease_nipple_and_ring_references",
    "front_right_formed_lower_spring_seat_comparison",
    "front_right_four_spring_seat_fixing_sets_comparison",
    "front_right_pressed_wishbone_and_eye_reference",
    "front_right_four_tapered_inner_bush_comparisons",
    "front_right_two_stepped_inner_pin_comparisons",
    "front_right_inner_special_washer_nut_comparisons",
    "front_right_kingpin_and_bored_lower_foot_reference",
    "front_right_stepped_outer_fulcrum_pin_reference",
    "front_right_lower_cotter_washer_nut_reference",
    "front_right_outer_end_plugs_grease_nipple_and_ring_references"
  ],
  "existing_joint_nodes_unchanged": true,
  "side_checks": {
    "left": {
      "valid_connected_coil": true,
      "ground_planes_and_axis_retained": true,
      "wire_radial_section_samples_mm": [
        12.699998026001651,
        12.699997950961915,
        12.699998101003985,
        12.699997951002956,
        12.699998026001708
      ],
      "interpreted_od_bbox_mm": 104.64800541220018,
      "modeled_turns_central_end_total": [
        7,
        2,
        9
      ],
      "turn_count_limit": "Construction counts only; no measured effective count, fitted end geometry, stiffness or loaded state.",
      "source_neighbor_overlap_mm3": {
        "lower_seat": 0.0,
        "upper_seat": 0.0,
        "buffer": 0.0,
        "hood": 0.0
      },
      "source_lower_seat_distance_mm": 6.166741335976517,
      "source_upper_seat_distance_mm": 9.313333333329979,
      "lower_ground_to_flat_seat_station_difference_mm": 19.4733333333333,
      "upper_flat_seat_to_ground_station_difference_mm": 9.31333333333339,
      "relationship_limit": "Reference geometry only; no fitted clearance, working seating or verified removal path."
    },
    "right": {
      "valid_connected_coil": true,
      "ground_planes_and_axis_retained": true,
      "wire_radial_section_samples_mm": [
        12.699998101004837,
        12.699998025961804,
        12.699998101005008,
        12.699998026002845,
        12.699998026004835
      ],
      "interpreted_od_bbox_mm": 104.64800541213043,
      "modeled_turns_central_end_total": [
        7,
        2,
        9
      ],
      "turn_count_limit": "Construction counts only; no measured effective count, fitted end geometry, stiffness or loaded state.",
      "source_neighbor_overlap_mm3": {
        "lower_seat": 0.0,
        "upper_seat": 0.0,
        "buffer": 0.0,
        "hood": 0.0
      },
      "source_lower_seat_distance_mm": 6.166741335976517,
      "source_upper_seat_distance_mm": 9.313333333329979,
      "lower_ground_to_flat_seat_station_difference_mm": 19.4733333333333,
      "upper_flat_seat_to_ground_station_difference_mm": 9.31333333333339,
      "relationship_limit": "Reference geometry only; no fitted clearance, working seating or verified removal path."
    }
  },
  "retained_neighbor_files": [
    "front-structure-reference.json",
    "front-structure-reference.step",
    "front-kingpin-reference.json",
    "front-kingpin-reference.step",
    "front-hub-reference.json",
    "front-hub-reference.step",
    "front-caliper-reference.json",
    "front-caliper-reference.step",
    "steering-arm-reference.json",
    "steering-arm-reference.step",
    "antiroll-reference.json",
    "antiroll-reference.step"
  ],
  "source_mapping_complete": true
}