{
  "schema": "factory-emission-operation-map-v1",
  "baseline": "40599580",
  "publication": "AKM4071/B incorporating AKM3267",
  "market_scope": "Emission control 1975\u20131976",
  "source": "https://www.spridgets.de/downloads/Midget%201500%20WH%20Teil%203.pdf",
  "source_sha256": "ef9fcafbd4e1387439bff02bf75dbc7222403a26374bb93ef3a77ca9aa5e4e66",
  "read_status": "Printed104\u2013105 / PDF16\u201317 visually read in this pass; OCR used only as a search aid.",
  "operations": [
    {
      "operation": "17.25.07",
      "printed_page": 104,
      "pdf_page": 16,
      "assembly": "Air pump",
      "documented_relationship": "Removal includes the vent-hose bracket, oil-filter cartridge, pump hose, drive belt, adjusting-link bolt, upper bolt and spacer; the pump is supported during release.",
      "model_boundary": "No fitted air-pump installation is established. The modeled owner-filter obstacle does not prove clearance for the factory pump arrangement."
    },
    {
      "operation": "17.25.17",
      "printed_page": 104,
      "pdf_page": 16,
      "assembly": "Air manifold",
      "documented_relationship": "The check-valve joint is held against twisting; capillary clips, support bracket, rear rocker-cover stud and four head unions are involved.",
      "model_boundary": "Rocker cover and head references exist; injection manifold, capillary clips and fitted union locations are not established."
    },
    {
      "operation": "17.25.26",
      "printed_page": 105,
      "pdf_page": 17,
      "assembly": "Diverter valve",
      "documented_relationship": "The heater intake hose, check-valve hose, pump hose, vacuum connection, bracket fixings and gasket are involved.",
      "model_boundary": "These factory roles are not assigned to unidentified owner components."
    },
    {
      "operation": "17.40.01",
      "printed_page": 105,
      "pdf_page": 17,
      "assembly": "Running-on control valve",
      "documented_relationship": "Removal disconnects its control hose, vent pipe and leads; the valve turns 45 degrees to release from the body-panel opening.",
      "model_boundary": "No matching fitted valve or receiver has been identified; the documented turn is not a verified modeled withdrawal."
    },
    {
      "operation": "17.45.01",
      "printed_page": 105,
      "pdf_page": 17,
      "assembly": "EGR valve",
      "documented_relationship": "Removal involves vacuum and metal pipes, the inlet-manifold banjo connection and a locknut; refitting includes an interval-counter instruction.",
      "model_boundary": "Fitted valve, pipe route and counter branch remain unselected."
    }
  ],
  "additional_text_read": [
    "17.15.01 evaporative-loss leak testing, printed104",
    "17.25.01 air-pump test, printed104",
    "17.25.22 check-valve test and compressed-air caution, printed105",
    "17.30.02 air-temperature valve check, printed105 (previously read)"
  ],
  "scope": "Dependency map, not a complete procedure transcription or fitted-car instruction. Tests and settings are not applied to unidentified owner systems. No new geometry or removal-path simulation.",
  "missing_rear_brake_operation": {
    "operation": "70.40.03",
    "status": "Operation text remains unaccessed; index is not procedure evidence.",
    "bounded_alternate_search": [
      "1978mgmidget.com/manuals_and_booklets.html inspected: earlier tuning, Lucas and1967handbook links, no applicable1500workshop brake section.",
      "Publisher and public search results identify AKM3267/AKM4071B, but no new accessible applicable operation text recovered.",
      "Previously403Teil2/4/5 links not retried."
    ]
  }
}
