{
  "schema": "existing-evidence-engine-running-review-v1",
  "date": "2026-10-27",
  "baseline_commit": "41cebd6c",
  "scope": "Current major engine-bay,transmission,steering,suspension,brake and wheel candidates;factory/catalog/photo estimates remain distinct from actual fitted acceptance.",
  "owner_photos_newly_reinspected": [
    "cars/assets/photos/img_6853.jpg",
    "cars/assets/photos/img_6891.jpg"
  ],
  "evidence_method": "Reconcile active source selections,builders,source limits and preceding evidence records. Previously rejected unchanged frame/camera/manual searches were not rerun. Current supplier17H9439photo led to one implemented major casting-contour correction;metric gaps did not prevent that independent work.",
  "engine_bay_regions": [
    {
      "id": "castings-and-internals",
      "current_sources": [
        {
          "placement": "native_engine_placement",
          "path": "midget-1500-measured-core.json",
          "groups": 233
        },
        {
          "placement": "native_main_bearing_placement",
          "path": "main-bearing-reference.json",
          "groups": 16
        },
        {
          "placement": "native_rocker_support_placement",
          "path": "rocker-support-reference.json",
          "groups": 10
        }
      ],
      "local_evidence": [
        "main-bearing-validation.json",
        "rocker-support-validation.json",
        "engine-cam-frame-gap.json"
      ],
      "present": "Block open crankcase/saddles,head passages,crank/rod and rocker architectures are already represented. Existing factory internal dimensions remain separate from provisional exterior sections.",
      "review_decision": "The documented cam/deck/head frame and six cap receiver axes are not independently established. No located casting section supports a particular receiver/boss correction.",
      "external_dependency": "Applicable casting/receiver sections and a common crank/cam/deck/head datum chain;fitted cap receiver axes/depths before changing these relationships.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "front-drive-fan-and-pump",
      "current_sources": [
        {
          "placement": "native_front_drive_photo_placement",
          "path": "front-drive-photo-reference.json",
          "groups": 10
        },
        {
          "placement": "native_alternator_photo_placement",
          "path": "alternator-photo-reference.json",
          "groups": 13
        },
        {
          "placement": "native_upper_cooling_photo_placement",
          "path": "upper-hose-connected-reference.json",
          "groups": 9
        }
      ],
      "local_evidence": [
        "front-drive-photo-validation.json",
        "upper-cooling-photo-evidence.json"
      ],
      "present": "Photo-led drive,alternator and upper-outlet comparison sources supplement the original engine. Owner6853shows the installed fan/upper hose/alternator/cowl context.",
      "review_decision": "The13-blade/coupling catalog branch is not fitted identity. The inherited housing/photo-pump pose discrepancy is not resolved by copying a replacement outline or moving the whole body.",
      "external_dependency": "Readable fitted fan/coupling/pump identities and common shaft,mating-face and mounting datums;observed complete blade/hub geometry for a fitted correction.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "radiator-and-body-support",
      "current_sources": [
        {
          "placement": "native_radiator_connections_placement",
          "path": "radiator-formed-tanks-reference.json",
          "groups": 10
        },
        {
          "placement": "native_cooling_support_placement",
          "path": "cooling-channel-reference.json",
          "groups": 8
        }
      ],
      "local_evidence": [
        "radiator-core-validation.json",
        "radiator-formed-tanks-evidence.json",
        "cooling-body-channel-validation.json"
      ],
      "present": "Open tube/fin bank,formed tanks,cowl/guard and tapered folded body brackets already replace the opaque core,box tanks and cubic supports.",
      "review_decision": "Replacement photos supplied the implemented architecture. Hidden receiver/weld sections,pressure joints and actual common-body mounting are not recovered.",
      "external_dependency": "Installed core/tank/cowl/body datum map and visible applicable hidden support/receiver sections;sealed joints and fitted identity for functional claims.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "coolant-and-heater-circuit",
      "current_sources": [
        {
          "placement": "native_upper_cooling_photo_placement",
          "path": "upper-hose-connected-reference.json",
          "groups": 9
        },
        {
          "placement": "native_heater_return_placement",
          "path": "heater-return-reference.json",
          "groups": 8
        },
        {
          "placement": "native_expansion_connections_placement",
          "path": "expansion-connections-reference.json",
          "groups": 7
        },
        {
          "placement": "native_heater_assembly_placement",
          "path": "heater-assembly-reference.json",
          "groups": 16
        }
      ],
      "local_evidence": [
        "heater-return-profile-evidence.json",
        "heater-matrix-validation.json",
        "heater-depth-validation.json"
      ],
      "present": "Connected upper-hose reference,formed return-pipe/tab,photo-conditioned heater case and open matrix architecture are present. Owner6891shows local hoses/tap but not complete casting-port continuity.",
      "review_decision": "Retained housing/pipe/hose and matrix/short-pipe source discrepancies are explicit. Neither the photos nor branch drawings select a particular hidden curve,casting port or bellhousing fixing.",
      "external_dependency": "Identified hidden pipe/hose endpoints and casting-port continuity,exact support fixing and installed core/pipe station map;applicable sealed circuit/configuration.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "intake-breather-and-controls",
      "current_sources": [
        {
          "placement": "native_intake_mounting_placement",
          "path": "intake-mounting-reference.json",
          "groups": 36
        },
        {
          "placement": "native_throttle_controls_placement",
          "path": "throttle-controls-reference.json",
          "groups": 7
        },
        {
          "placement": "native_manifold_diaphragm_placement",
          "path": "manifold-diaphragm-reference.json",
          "groups": 10
        }
      ],
      "local_evidence": [
        "rocker-breather-photo-evidence.json",
        "rocker-breather-validation.json"
      ],
      "present": "Flat manifold receiver,carburetor/cleaner connections and the photo-reconstructed forward breather loop are present. Federal linkage is an explicitly conditional topology comparison.",
      "review_decision": "The actual support/preheater and remote control routes remain unselected. No new complete hidden support or route is observed in the reviewed photos.",
      "external_dependency": "Fitted carburetor/emissions/linkage configuration and visible or applicable located support,preheater and cable/link endpoints.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "fuel-and-tank-feed",
      "current_sources": [
        {
          "placement": "native_observed_fuel_pump_placement",
          "path": "observed-fuel-pump-reference.json",
          "groups": 14
        },
        {
          "placement": "native_fuel_tank_placement",
          "path": "fuel-tank-pressings-reference.json",
          "groups": 11
        },
        {
          "placement": "native_fuel_filler_placement",
          "path": "fuel-filler-reference.json",
          "groups": 7
        },
        {
          "placement": "native_rear_elc_placement",
          "path": "rear-elc-reference.json",
          "groups": 7
        }
      ],
      "local_evidence": [
        "fuel-feed-evidence.json",
        "fuel-tank-pressings-evidence.json"
      ],
      "present": "Owner-observed electric pump,conditional open hose boundaries,hollow tank feed and formed tank stampings are present.",
      "review_decision": "Tank feed end remains257.906mm from the untraced hose-A boundary. Flow direction,pump identity,hidden branch and emissions configuration are not established by proximity.",
      "external_dependency": "Identified actual pump/valve/canister configuration and an observed continuous tank-to-pump-to-carburetor route,including support and endpoint datums.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "battery-and-bay-electrical",
      "current_sources": [
        {
          "placement": "native_battery_assembly_placement",
          "path": "battery-assembly-reference.json",
          "groups": 19
        },
        {
          "placement": "native_bay_electrical_placement",
          "path": "bay-electrical-reference.json",
          "groups": 10
        }
      ],
      "local_evidence": [
        "battery-assembly-evidence.json"
      ],
      "present": "Owner-identifiedMAXX51Rcase/terminal/retention comparisons and visible four-fuse/local-loom architecture are present. Owner6891reinspection corroborates label and yellow-covered body-bolt lead context.",
      "review_decision": "Hidden tray receivers,terminal contact,can identities,wire duties,polarity and remote destinations are not inferred from cable color or apparent adjacency.",
      "external_dependency": "Installed battery/tray/receiver map and identified fitted electrical components,terminal duties and observed conductor endpoints for the specific proposed connection.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "engine-mounts-and-installed-starter",
      "current_sources": [
        {
          "placement": "native_front_power_support_placement",
          "path": "front-power-support-reference.json",
          "groups": 7
        },
        {
          "placement": "native_rear_engine_plate_placement",
          "path": "rear-engine-plate-reference.json",
          "groups": 1
        }
      ],
      "local_evidence": [
        "starter-installed-context-audit.json"
      ],
      "present": "Vertical front mounting stack and detailed starter/rear-plate context already replace earlier sideways mount and isolated starter representations.",
      "review_decision": "Common body/power-unit registration,loaded rubber support,actual mount branch and hidden starter/cable maps remain unverified. Existing casing/bolt/plate conflicts are source findings.",
      "external_dependency": "Accepted installed body/power-unit/mount datum chain and fitted mount/starter hardware and receiver configuration;loaded behavior or release procedure evidence where relevant.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "exhaust-and-underfloor-obstacles",
      "current_sources": [
        {
          "placement": "native_front_exhaust_placement",
          "path": "front-exhaust-reference.json",
          "groups": 6
        },
        {
          "placement": "native_underfloor_exhaust_placement",
          "path": "underfloor-exhaust-reference.json",
          "groups": 12
        }
      ],
      "local_evidence": [],
      "present": "Separate manifold/downpipe,coupling,two-chamber underfloor system and formed support/insulation roles are present.",
      "review_decision": "Ordinary versusCalifornia configuration remains conditional. The nominal8.47/16.09mm chamber-to-tyre-bottom differences expose an estimated shared-frame issue;raising the exhaust alone is unsupported.",
      "external_dependency": "Fitted exhaust/catalyst branch and registered power-unit,body,axle,tyre and support datums,including installed pipe route and load state.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "pedal-and-hydraulic-connections",
      "current_sources": [
        {
          "placement": "native_pedal_support_placement",
          "path": "curved-pedals-reference.json",
          "groups": 15
        },
        {
          "placement": "native_master_connections_placement",
          "path": "master-connections-reference.json",
          "groups": 15
        },
        {
          "placement": "native_clutch_release_placement",
          "path": "clutch-formed-housing-reference.json",
          "groups": 21
        }
      ],
      "local_evidence": [],
      "present": "Curved pedals,master/slave/pipe comparison roles and body platform connections are represented;conditional circuit choices stay labeled.",
      "review_decision": "The actual cylinder/circuit branch,hidden line endpoints and column/plinth relationship remain unselected. Source topology does not establish pressure function or operating travel.",
      "external_dependency": "Identified fitted cylinders/circuit and continuous line/end maps,registered body/pedal/column pivots and applicable procedure/loaded adjustment evidence.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "transmission-and-power-unit-joints",
      "current_sources": [
        {
          "placement": "native_transmission_placement",
          "path": "transmission-formed-castings-reference.json",
          "groups": 21
        },
        {
          "placement": "native_clutch_release_placement",
          "path": "clutch-formed-housing-reference.json",
          "groups": 21
        },
        {
          "placement": "native_rear_power_support_placement",
          "path": "rear-formed-cradle-reference.json",
          "groups": 14
        },
        {
          "placement": "native_gearbox_internals_placement",
          "path": "gearbox-internals-reference.json",
          "groups": 25
        }
      ],
      "local_evidence": [
        "gearbox-castings-validation.json",
        "gearbox-castings-browser-validation.json"
      ],
      "present": "New case/tail cast architecture and earlier flared clutch housing supplement separate selector,internal,release and rear cradle roles.",
      "review_decision": "New tail/crossmember1569.717603mm3 and tail/cradle2003.796107mm3contacts plus retained selector contact are explicit. No independently located mating section identifies a corrective pose or relief.",
      "external_dependency": "Fitted gearbox/clutch/cradle identities and registered case,selector,bearing and support interfaces;actual surrounding geometry and applicable service procedure for removal.",
      "status": "no_additional_supported_geometry_selected"
    }
  ],
  "running_gear_regions": [
    {
      "id": "steering",
      "current_sources": [
        {
          "placement": "native_steering_rack_placement",
          "path": "steering-rack-reference.json",
          "groups": 24
        },
        {
          "placement": "native_steering_arm_placement",
          "path": "steering-arm-reference.json",
          "groups": 12
        },
        {
          "placement": "native_column_assembly_placement",
          "path": "column-assembly-reference.json",
          "groups": 6
        },
        {
          "placement": "native_steering_wheel_placement",
          "path": "steering-wheel-reference.json",
          "groups": 3
        }
      ],
      "local_evidence": [
        "rack-mount-validation.json",
        "steering-wheel-validation.json"
      ],
      "present": "Formed rack straps/cradles,cast pinion/plunger roles,outer joints,open column jacket and dished wheel references are already represented.",
      "review_decision": "Fitted shaft/column/rack identities,body opening/receiver registration and steering sweep remain unknown. Static source contacts do not select a new mount or shaft correction.",
      "external_dependency": "Fitted steering component/shaft engagement and body receiver datums;observed working steering/suspension limits before any loaded sweep or access claim.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "front-suspension",
      "current_sources": [
        {
          "placement": "native_front_fulcrum_placement",
          "path": "wishbone-shell-reference.json",
          "groups": 22
        },
        {
          "placement": "native_front_kingpin_placement",
          "path": "front-kingpin-profile-reference.json",
          "groups": 22
        },
        {
          "placement": "native_front_structure_placement",
          "path": "front-lower-face-reference.json",
          "groups": 15
        },
        {
          "placement": "native_antiroll_placement",
          "path": "antiroll-reference.json",
          "groups": 10
        }
      ],
      "local_evidence": [
        "front-coil-validation.json"
      ],
      "present": "Connected formed wishbones,coil/seat comparisons,folded lower pickups,towers,damper mounts and completed swivel profile are present.",
      "review_decision": "Completed swivel work is retained. Lower/upper spring-seat station differences19.4733/9.3133mm are source gaps,not actual clearances;no loaded spring seating or pickup survey is established.",
      "external_dependency": "Applicable fitted pickup/seat section and component identities,common body datums and documented loaded state for spring seating/travel.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "rear-suspension",
      "current_sources": [
        {
          "placement": "native_rear_spring_pack_placement",
          "path": "rear-spring-pack-reference.json",
          "groups": 18
        },
        {
          "placement": "native_rear_axle_clamp_placement",
          "path": "rear-axle-clamp-reference.json",
          "groups": 20
        },
        {
          "placement": "native_rear_spring_hanger_placement",
          "path": "rear-spring-hanger-reference.json",
          "groups": 8
        },
        {
          "placement": "native_rear_damper_link_placement",
          "path": "rear-damper-link-reference.json",
          "groups": 20
        },
        {
          "placement": "native_rear_body_mount_placement",
          "path": "rear-body-mount-reference.json",
          "groups": 18
        }
      ],
      "local_evidence": [
        "rear-spring-section-validation.json"
      ],
      "present": "Six-leaf factory-reference pack,thin seating pads,formed axle seats/locating plates,body mounts and reconstructed twin-barrel lever dampers/links are present.",
      "review_decision": "Loaded leaf/rubber clamp stack,hidden hanger reinforcement,bump-stop receiver and strike face remain unlocated. Existing source contacts do not justify moving the axle or shortening the hanger gap.",
      "external_dependency": "Fitted spring/damper/clamp/bump-stop configuration and registered body/suspension interfaces,including loaded seating and travel limits.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "axle-and-driveline",
      "current_sources": [
        {
          "placement": "native_rear_axle_placement",
          "path": "rear-axle-reference.json",
          "groups": 9
        },
        {
          "placement": "native_propshaft_placement",
          "path": "propshaft-reference.json",
          "groups": 19
        },
        {
          "placement": "native_pinion_support_placement",
          "path": "pinion-support-reference.json",
          "groups": 8
        },
        {
          "placement": "native_differential_support_placement",
          "path": "differential-support-reference.json",
          "groups": 12
        },
        {
          "placement": "native_rear_hub_placement",
          "path": "rear-hub-reference.json",
          "groups": 32
        }
      ],
      "local_evidence": [],
      "present": "Gasket-comparison banjo/carrier envelope,open propshaft/yokes,bearing/retention and differential support/wheel-end roles are present.",
      "review_decision": "Matched carrier/cap identity,gear ratio,tooth engagement,splines,selected shims and bearing preload remain unverified. Catalog boundary bearings do not establish fitted assembly settings.",
      "external_dependency": "Identified fitted axle/gearset/shaft components and applicable located sections/settings,including actual shaft engagement and measured installed bearing interfaces.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "front-brakes",
      "current_sources": [
        {
          "placement": "native_front_caliper_placement",
          "path": "front-caliper-formed-castings-reference.json",
          "groups": 30
        },
        {
          "placement": "native_front_hub_placement",
          "path": "front-hub-reference.json",
          "groups": 30
        },
        {
          "placement": "native_brake_routes_placement",
          "path": "brake-routes-reference.json",
          "groups": 20
        }
      ],
      "local_evidence": [
        "caliper-castings-validation.json",
        "caliper-castings-browser-validation.json",
        "caliper-mount-validation.json"
      ],
      "present": "The current review selected and implemented recessed cast side webs,raised circular bosses and rounded bridge/ears. Disc/hub/cover and layered mount/retention roles remain.",
      "review_decision": "After this supported correction,remaining items are fitted caliper/cover/hose branch,pressure passages,seals and loaded brake/wheel relationships. No neighbor or pipe route was moved to erase contacts.",
      "external_dependency": "Fitted brake/hose configuration,continuous hydraulic endpoints and registered wheel/caliper/disc interfaces;applicable procedure and actual tool/access geometry.",
      "status": "supported_correction_implemented"
    },
    {
      "id": "rear-brakes-and-handbrake",
      "current_sources": [
        {
          "placement": "native_rear_brake_placement",
          "path": "rear-brake-reference.json",
          "groups": 36
        },
        {
          "placement": "native_handbrake_placement",
          "path": "handbrake-reference.json",
          "groups": 19
        },
        {
          "placement": "native_rear_hub_placement",
          "path": "rear-hub-reference.json",
          "groups": 32
        }
      ],
      "local_evidence": [
        "handbrake-control-validation.json"
      ],
      "present": "Separate shoe/cylinder/adjuster/retention and scissor-expander comparisons supplement the cabin handbrake control and cable routes.",
      "review_decision": "Fitted expander/backplate passage,boot,loaded shoe bearing and cable equalization remain unresolved. Later donor/technician material is not a complete1975procedure or fitted identification.",
      "external_dependency": "Fitted rear-brake/expander/backplate configuration and installed line/cable/end geometry,plus applicable adjustment,release and service evidence.",
      "status": "no_additional_supported_geometry_selected"
    },
    {
      "id": "wheels-and-tyres",
      "current_sources": [
        {
          "placement": "native_wheel_profile_placement",
          "path": "wheel-profile-reference.json",
          "groups": 8
        }
      ],
      "local_evidence": [
        "rostyle-forming-validation.json"
      ],
      "present": "Owner-photo formed four-spoke/eight-vent wheel centers,bright trim,hollow tyres and factory nominal bead comparisons are present.",
      "review_decision": "Fitted rim/tyre markings,actual offset,bead/trim retention and loaded sidewall envelope remain unknown. The nominal tyre designation does not verify an aspect ratio or actual loaded fit.",
      "external_dependency": "Readable fitted wheel/tyre specification and installed hub/rim/tyre datums,including loaded condition and trim retention where relevant.",
      "status": "no_additional_supported_geometry_selected"
    }
  ],
  "supported_correction": {
    "commit": "41cebd6c",
    "evidence": "caliper-castings-evidence.json",
    "native_validation": "caliper-castings-validation.json",
    "browser_validation": "caliper-castings-browser-validation.json"
  },
  "visual_inspection": "Current calipers inspected in matched native views and whole-car underside. Preceding body review inspected closed exterior,open bonnet/doors and rear underside. All84sources ready;counts attest loading only.",
  "remaining_work": "Final workshop/readiness reconciliation and requirement-level completion audit. No further qualified major geometry correction selected from the reviewed material;external dependencies above remain precise and unresolved.",
  "limits": "This review does not verify the fitted1:1model,all casting surfaces,common metric registration,circuits,loaded articulation,strength,tool access or replacement procedures.",
  "requested_new_input": false,
  "push_or_deployment": false
}
