{
  "schema": "existing-evidence-body-chassis-review-v1",
  "date": "2026-10-27",
  "baseline_commit": "c1ade86a",
  "scope": "Current active body/chassis sources and visible whole-car context;this is a bounded candidate review,not a dimensional or replacement acceptance audit.",
  "new_geometry": false,
  "owner_photo_newly_reinspected": "cars/assets/photos/img_6341.jpg",
  "evidence_use": "Existing owner-photo reconstruction and native-validation records supply prior observations. Current source metadata/builders were reconciled with active placement URLs. Newly read BMH front-centre/rear-body tables corroborate comparison applications and roles,not hidden installed dimensions.",
  "primary_sources": [
    "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-front-centre-body/",
    "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-rear-body/"
  ],
  "manufacturer_findings": "BMH distinguishes rubber-bumper frame/wheelhouse/pickup comparisons and the rear floor,wheelhouse,side and underframe roles already represented. Earlier chrome-bumper applications remain distinct. No applicable dimensional joint map is supplied by those tables.",
  "regions": [
    {
      "id": "front-frame-and-pickups",
      "current_sources": [
        {
          "placement": "native_front_structure_placement",
          "path": "front-lower-face-reference.json",
          "groups": 15
        }
      ],
      "local_evidence": [
        "front-frame-datum-review.json",
        "front-frame-manufacturer-follow-up.json",
        "underbody-aperture-face-evidence.json",
        "underbody-pulley-circle-evidence.json"
      ],
      "present": "Connected rails,formed crossmember/lower-face apertures,spring towers and folded pickups already replace the earlier boxes/cone/transverse-ear construction.",
      "review_decision": "Separate rail-center and lower-pivot coordinates,exact aperture-bearing face tilt and hidden frame section remain unestablished. Do not apply the earlier-model dimensions or use the pulley ratio as absolute scale.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Applicable1500alignment point definitions and an accepted metric datum chain separating rail centers,pickups and body/power-unit axes."
    },
    {
      "id": "front-wheelhouses-and-bay-edges",
      "current_sources": [
        {
          "placement": "native_front_wheelhouse_placement",
          "path": "front-wheelhouse-reference.json",
          "groups": 10
        }
      ],
      "local_evidence": [
        "front-wheelhouse-support-evidence.json"
      ],
      "present": "Broad folded roofs,end slopes,open longitudinal triangular supports,stepped access mouths and continuous formed upper bay edges are present.",
      "review_decision": "The catalog applications already used do not add an independently located section,weld/lap map or actual symmetry. A second change to support plane or access mouth would repeat unsupported choices.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "A visible or dimensioned rubber-bumper section/installed joint map that locates the hidden rail/valance/wing interfaces."
    },
    {
      "id": "bulkhead-footwells-and-hinge-pillars",
      "current_sources": [
        {
          "placement": "native_front_footwell_placement",
          "path": "front-footwell-reference.json",
          "groups": 11
        }
      ],
      "local_evidence": [
        "body-rail-junction-validation.json",
        "pedal-body-platform-validation.json",
        "wing-door-junction-validation.json"
      ],
      "present": "Separate footwell sides/roofs,toe closing,pillar channels and the pedal platform are present. Rail/tunnel boundary and concealed pillar recess corrections are already incorporated.",
      "review_decision": "Left pedal-plinth corner lap,column/body registration,captive receivers and welded reinforcement are unresolved;the present corners are not evidence of actual seam ownership.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Installed pedal-platform/footwell section and column datum,plus visible hidden receiver and lap boundaries before assigning fitted attachment or repair geometry."
    },
    {
      "id": "floor-tunnel-and-sills",
      "current_sources": [
        {
          "placement": "native_cabin_understructure_placement",
          "path": "rear-shut-panel-reference.json",
          "groups": 14
        }
      ],
      "local_evidence": [
        "formed-floor-evidence.json",
        "central-floor-evidence.json",
        "sill-section-validation.json",
        "lower-body-side-reference.json"
      ],
      "present": "Active rear-shut-panel source contains the preceding formed sills,floor halves,tapered tunnel,central1500aperture,raised rear cockpit and heelboards.",
      "review_decision": "Open sill ends,front-wing/sill filler ownership,jacking receivers and actual floor pressings remain unknown. Manufacturer part roles alone do not locate those boundaries or justify a repair section.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Visible applicable sill end/jack-receiver sections and floor pressing/seam geometry registered to the current doorway/floor datums."
    },
    {
      "id": "rear-wheelhouses-and-cockpit-side",
      "current_sources": [
        {
          "placement": "native_rear_body_mount_placement",
          "path": "rear-body-mount-reference.json",
          "groups": 18
        },
        {
          "placement": "native_rear_quarter_placement",
          "path": "rear-cockpit-side-reference.json",
          "groups": 4
        }
      ],
      "local_evidence": [
        "rear-floor-reinforcement-evidence.json",
        "rear-wheelhouse-shell-evidence.json"
      ],
      "present": "Dished inner wheelhouses,formed floor-contour reinforcements and wheelhouse-to-B-post panels supplement the rounded outer quarters.",
      "review_decision": "Wheelhouse/floor seams and side-panel laps are estimates. Existing source contacts are retained rather than interpreted as welds or actual clearances.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Installed inner-wheelhouse/floor/B-post seam sections and metric registration of the body to rear suspension."
    },
    {
      "id": "rear-heelboard-and-spring-hanger-registration",
      "current_sources": [
        {
          "placement": "native_cabin_understructure_placement",
          "path": "rear-shut-panel-reference.json",
          "groups": 14
        },
        {
          "placement": "native_rear_spring_hanger_placement",
          "path": "rear-spring-hanger-reference.json",
          "groups": 8
        }
      ],
      "local_evidence": [
        "rear-shut-panel-validation.json"
      ],
      "present": "Separate inner heelboard,outer shut panel and hanger body-box comparisons are present.",
      "review_decision": "The documented245.5333mm inner-heelboard/front-eye station difference and204.8333mm outer-panel/body-box minimum distances do not establish the missing physical connection. No bridge is justified.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Common body/rear-spring datum chain and applicable hanger reinforcement section that locates its connection to the heelboard/floor."
    },
    {
      "id": "rear-floor-damper-and-bumper-supports",
      "current_sources": [
        {
          "placement": "native_rear_frame_placement",
          "path": "rear-frame-reference.json",
          "groups": 10
        },
        {
          "placement": "native_boot_floor_placement",
          "path": "boot-floor-reference.json",
          "groups": 3
        }
      ],
      "local_evidence": [
        "boot-floor-transition-evidence.json"
      ],
      "present": "Rounded floor transition,outer boot extensions,formed damper panels and stepped bumper beams are present.",
      "review_decision": "Hidden damper reinforcement,bump-stop receiver/strike face,beam welds and the historical bumper-stud relief choices remain unverified. No new contours are independently located.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Applicable installed rear support/bump-stop and bumper-beam/floor section,including seam ownership and fitted suspension registration."
    },
    {
      "id": "rear-deck-quarters-and-boot",
      "current_sources": [
        {
          "placement": "native_boot_body_placement",
          "path": "boot-body-reference.json",
          "groups": 3
        },
        {
          "placement": "native_boot_lid_placement",
          "path": "boot-lid-reference.json",
          "groups": 19
        },
        {
          "placement": "native_rear_quarter_placement",
          "path": "rear-cockpit-side-reference.json",
          "groups": 4
        }
      ],
      "local_evidence": [
        "boot-body-validation.json",
        "boot-lid-frame-validation.json"
      ],
      "present": "Rolled quarter/deck transition,downturned boot aperture lip,rear closing wall,cockpit/boot boundary and lid inner pressing/closure roles are present.",
      "review_decision": "Striker reinforcement is catalog-supported as a role but its hidden profile,thickness and installed attachment are not recovered. Current lid seal/hinge/closure geometry does not verify loaded engagement.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Visible applicable striker/backing section and an installed lid-aperture/hinge/closure datum map before adding a fitted hidden receiver."
    },
    {
      "id": "front-skins-bonnet-and-scuttle",
      "current_sources": [
        {
          "placement": "native_bonnet_structure_placement",
          "path": "bonnet-structure-reference.json",
          "groups": 8
        },
        {
          "placement": "native_bonnet_hinge_placement",
          "path": "bonnet-hinge-reference.json",
          "groups": 8
        },
        {
          "placement": "native_bonnet_closure_placement",
          "path": "bonnet-closure-reference.json",
          "groups": 16
        },
        {
          "placement": "native_wiper_drive_placement",
          "path": "wiper-drive-reference.json",
          "groups": 30
        }
      ],
      "local_evidence": [],
      "present": "Native rounded wings,bonnet skin/inner frame,multi-link hinges,main/safety closure and formed scuttle/apron are present in the current viewer.",
      "review_decision": "Owner views support exterior shape and visible hinge architecture;hidden skin/frame joints,screen-foot receiver,seams and actual closure engagement remain unlocated. No new visible large-panel defect was selected in this review.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Registered hidden panel/hinge/closure sections or applicable dimensional construction evidence for the specific proposed correction."
    },
    {
      "id": "doors-and-apertures",
      "current_sources": [
        {
          "placement": "native_door_hardware_placement",
          "path": "window-installation-reference.json",
          "groups": 38
        },
        {
          "placement": "native_windscreen_placement",
          "path": "windscreen-bow-reference.json",
          "groups": 17
        }
      ],
      "local_evidence": [
        "wing-door-junction-validation.json"
      ],
      "present": "Curved door skins,connected inner perimeter,parallel-arm regulator,lower carrier,quarterlight/guide and bowed screen references are present.",
      "review_decision": "Owner6341 gives doorway/glass/trim context but does not expose all hidden door branches,impact-bar presence or screen-foot receivers. Current static relationships do not establish mechanism travel.",
      "status": "no_new_supported_geometry_selected",
      "external_dependency": "Fitted hidden door configuration and registered hinge/latch/guide/screen-foot geometry for operating fit or replacement access."
    }
  ],
  "browser_inspection": {
    "views": [
      "closed",
      "open",
      "under"
    ],
    "ready": 84,
    "sourceErrors": [],
    "records": 1017,
    "noDiagnosticHook": true,
    "pageErrors": []
  },
  "visual_observations": "Closed exterior,open bonnet/doors and rear underside were visually inspected. Major body shells and running-gear context render. The low exhaust and independent rear-floor/hanger source relationships remain explicit discrepancies;no fitted clearance follows. Open-door/bonnet positions illustrate display motion only.",
  "disposition": "Body/chassis candidate review complete with precise dependencies for the unresolved regions;no additional qualified major body correction selected from these sources. Engine-bay and running-gear reviews remain pending. Reopen a region only for a concrete new deficiency and supporting evidence,not another general audit.",
  "requested_new_input": false,
  "push_or_deployment": false
}
