{
  "schema": "clutch-housing-profile-validation-v1",
  "valid": true,
  "mesh_groups": 21,
  "solids": 42,
  "housing_solids": 1,
  "housing_mesh_volume_relative_error": 0.0003948692821971189,
  "added_material_mm3": 1317809.013617467,
  "removed_material_mm3": 0.0,
  "byte_held_meshes": [
    "clutch_split_slave_boss_flange_and_two_mount_bores_comparison",
    "clutch_two_boss_to_housing_screw_envelopes",
    "clutch_separate_boss_pinch_bolt_and_nut_envelopes",
    "clutch_slave_hollow_exterior_and_closed_rear_envelope",
    "clutch_slave_separate_open_dust_boot_comparison",
    "clutch_slave_open_inlet_and_bleed_screw_envelopes",
    "clutch_tilted_catalog_length_pushrod_and_bored_eye_comparison",
    "clutch_slave_separate_plunger_and_estimated_rod_seat_comparison",
    "clutch_slave_separate_unloaded_cup_seal_role_comparison",
    "clutch_slave_separate_unloaded_return_spring_role_comparison",
    "clutch_release_lever_shared_pivot_rod_and_open_carrier_saddles_comparison",
    "clutch_two_housing_pivot_bush_comparisons",
    "clutch_pivot_pin_and_smooth_tolerance_ring_envelopes",
    "clutch_separate_rod_eye_joint_pin_and_retainer_envelopes",
    "clutch_hollow_release_carrier_reference",
    "clutch_separate_annular_release_bearing_envelope",
    "clutch_two_retained_carrier_engagement_pin_comparisons",
    "clutch_housing_case_uncompressed_gasket_comparison",
    "clutch_five_housing_to_case_screws_and_four_unloaded_washers",
    "clutch_bottom_housing_bolt_copper_washer_comparison"
  ],
  "native_volume_held_groups": 20,
  "bounded_neighbor_checks": [
    {
      "source": "transmission-reference",
      "part": "gearbox_input_guide_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_front_cover_conditional_unloaded_oil_seal_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_front_cover_conditional_unloaded_oring_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_input_shaft_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_main_case_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_top_cover_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "transmission-reference",
      "part": "gearbox_cover_unloaded_gasket_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "front-footwell-reference",
      "part": "front_left_inner_toeboard_and_floor_return_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "front-footwell-reference",
      "part": "front_right_inner_toeboard_and_floor_return_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    },
    {
      "source": "front-exhaust-reference",
      "part": "front_exhaust_downpipe_reference",
      "before_mm3": 0.0,
      "after_mm3": 0.0
    }
  ],
  "source_sha256": {
    "clutch-release-reference.json": "a599bfa6bbb6f583630d2e3e7e858b209120d17809874f8b8f3df1ba26acad13",
    "clutch-release-reference.step": "ed85e1ebf54c0f543f1e2beabe02867388575bfd5319601b42ba7c0b00a521c5",
    "clutch-formed-housing-reference.json": "b6568628d6a6d4c347824ceb47b56adb5c637fb799731768932220c8b2a4dfa3",
    "clutch-formed-housing-reference.step": "9e213433b004e642b0e6c219b9ea1b96597442c7f129a71c4514f3239bee3ac4"
  },
  "limits": "Native topology/export and static source comparisons only. Bounded overlap is a model conflict or junction,not actual-car contact. The builder additionally checks shared slave/pivot/guide/case passages and static fork nonintersection. No fitted registration,working fork sweep,loaded support,strength,clearance or replacement path verified."
}