{
  "manufacturer_reference": "https://www.bmh-ltd.com/vehicle-parts/mg-midget-parts/mg-midget-front-centre-body/",
  "supplier_full_floor": {
    "page": "https://rimmerbros.com/Item--i-AHA7202",
    "image": "https://rimmerbros.com/ItemImages/Large/AHA7202.jpg",
    "sha256": "eea7bb5b32ceb60894d3361754c31f504e07817d66283be740f0fc1914a46de4",
    "observed": "Forward U-opening, central sheet continuing rearward between side floors, and a central aperture. Product described as1500specification; not actual-car identity."
  },
  "half_floor_comparison": {
    "page": "https://rimmerbros.com/Item--i-HMP415032",
    "image": "https://rimmerbros.com/ItemImages/Large/HMP415032.jpg",
    "sha256": "c70441a2b3eb486d103551e23ae715a19c9e2d29cb4504c7a51baafd9e658f7e",
    "observed": "Half floor lacks the full assembly central bridge. Pressings are visible but not applied as a calibrated pattern."
  },
  "official_catalog": {
    "url": "https://www.moss-europe.co.uk/content/files/pdfs/moss-europe-sprite-midget-catalogue-issue-25.pdf#page=282",
    "pdf_sha256": "13a3ef5c108a955218a02fcfd1c221af62842f1da2ff1dd2944204a46237d9c8",
    "location": "PDF282 / printed224",
    "access": "Downloaded official PDF, extracted text and visually inspected rendered page.",
    "finding": "AHA7202fullfloor and separatehalfpanels are drawn. The note identifies a1500floor aperture for gearbox-flange/propshaft bolt access. This is a documented panel role, not a complete service procedure."
  },
  "existing_owner_context": [
    "IMG_6341",
    "IMG_6919"
  ],
  "owner_dimensions_applied": false,
  "existing_gap": "Both side-floor panels stop at the tunnel inner edge, and the tunnel has an open underside. No central floor sheet or flange-access aperture was modeled.",
  "construction": "Add central sheet at the held side-floor Y plane, matching its inherited inner edges/rear station. Keep a selected forward U-mouth boundary and an estimated square aperture at the retained front coupling Z.",
  "limits": "All sheet dimensions, aperture size, forward boundary, joints and body/driveline registration remain estimates. No owner floor identity, factory cut map, strength, usable access or verified removal path. Do not add holes or shift mechanical sources to conceal rear-body conflicts."
}
