{
  "schema": "battery-assembly-evidence-v1",
  "review_date": "2026-10-27",
  "owner_sources": [
    "IMG_6891",
    "IMG_6892",
    "IMG_6901"
  ],
  "identity_basis": "Prior full-resolution IMG_6891/6892 label review identifies EverStart MAXX-51R; no identity from cable color or CCA alone.",
  "product_source": "https://www.walmart.com/ip/28275660",
  "current_listing_checked": "9.31x5.06x8.69in on2026-10-27;matches retained236.474x128.524x220.726mm envelope. Catalog dimensions,not owner measurements.",
  "retained_dimensions_and_stations": "Existing battery center/base and estimated20mm terminal projection;old tray/bar/rod dimensions and inherited cable-route stations after canonical reflection/profile correction.",
  "new_estimates": "Rounded external shell,2.5mm wall,lid recognition boundary,blank label,smooth tapered posts,split clamps/plain fixings,hollow insulation and smoothing. Two3.7mm radius bar passages share the retained rod axes;straight shanks/tangent lower hooks use inherited endpoints.",
  "factory_and_catalog_scope": "Factory PDF186 lists earlier HAN/GAN battery/fixings. Rimmer1500bar/packing/hooked-rod roles remain comparison architecture,not installed identification or actual anchors.",
  "factory_source": "https://www.spridgets.de/downloads/Parts-1977.pdf#page=186",
  "catalog_retention_source": "https://rimmerbros.com/ItemList--MG-Midget-1500-Battery-Fittings--m-24536",
  "explicit_source_conflicts": "Old retention/support frame remains independently registered.19internal bounded checks include eight positive pairs and31external checks include fifteen positive pairs;terminal insulation intersects posts/clamps,and retention intersects tray/heater/body sources. These remain drawing conflicts,not physical fitted contact or actual-car interference.",
  "limits": "Owner6891/6892 identifies the MAXX-51R label;6892/6901 supports visible terminal/lead and body-bolt surroundings. Walmart current dimensions9.31x5.06x8.69in corroborate the retained236.474x128.524x220.726mm catalog envelope,not a measured fitted case. The existing center/base and estimated20mm post projection stay. Rounded corners,2.5mm hollow case wall,lid recognition boundary,blank label,smooth posts,split clamps,pinch-fixing gauges,bore map and spline smoothing are estimates. Hollow case/lead boundaries do not model battery cells,electrolyte,internal conductors or a serviceable lid. Earlier factory battery plate and1500catalog bar/packing/hooked-rod roles are comparisons;their fitted presence and hidden anchors remain unverified. Old235x175x200mm retention stations stay,including the10.16mm case-to-tray-base gap. Two new3.7mm radius plain bar passages share the retained straight rod axes;lower hooks use a smooth tangent bend through the inherited stations,not a measured bend radius. All inherited lead route stations remain;colors are appearance only. Polarity,ratings,conductor specification,red remote endpoint,continuity,body-bond quality and energized condition are not assigned. Battery and clamp separate for inspection while tray/cables remain fixed,without simulating disconnection,flexing or lifting. No safe release order,loaded retention,body/heater/bonnet clearance,tool access or verified replacement/removal path is established."
}